BEGIN:VCALENDAR VERSION:2.0 PRODID:-//HaxDB//Events Calendar//EN CALSCALE:GREGORIAN METHOD:PUBLISH X-WR-CALNAME:Knox Makers Events BEGIN:VEVENT UID:event-7868-session-0@haxdb DTSTAMP:20260614T163024Z DTSTART:20260317T233000Z DTEND:20260318T003000Z SUMMARY:Meet OpenSCAD DESCRIPTION:OpenSCAD is a powerful text-based 3D modeller. We'll discuss its strengths and weaknesses\, briefly explore its language\, and consider some real-world examples. Finally\, we'll explore some unconventional ways makers can use it. LOCATION:Classroom\, Knox Makers - 116 Childress St SW\, Knoxville\, TN URL:https://events.knoxmakers.org/event/meet-openscad END:VEVENT BEGIN:VEVENT UID:event-7865-session-0@haxdb DTSTAMP:20260614T163024Z DTSTART:20260318T220000Z DTEND:20260319T000000Z SUMMARY:Kinusaiga DESCRIPTION:Kinusaiga is a traditional Japanese\, stitch-free art form that transforms fabric scraps into art. You could even think of it as quiltless quilting. This class will teach you the basics of Kinusaiga\, and you will go home with your own finished piece.\n\n \;\n\nHave a look here.  LOCATION:Arts & Crafts Zone\, Knox Makers - 116 Childress St SW\, Knoxville\, TN URL:https://events.knoxmakers.org/event/kinusaiga END:VEVENT BEGIN:VEVENT UID:event-7870-session-0@haxdb DTSTAMP:20260614T163024Z DTSTART:20260318T220000Z DTEND:20260319T010000Z SUMMARY:Power Hammer Authorization – LG25 "Thumper" DESCRIPTION:This class introduces you to the latest addition to the blacksmith shop\, Thumper\, our 25lb Little Giant PowerHammer! This class will cover operational maintenance\, necessary lubrication points\, how to swap out dies\, things to watch out for on this nearly 80 year old machine\, and plenty of forging time to get comfortable with its capabilities.\n\nProper attire is natural fiber clothing such as cotton jeans and T-shirts. Cotton/polyester blend is OK but synthetic clothing or other materials that can melt are unsafe. We have eye protection available but suggest you bring your own if you have them.\n\nThis class is for members only and costs $14.96. There will be a 4 person maximum and a 2 person minimum. If the minimum isn’t met 24 hours in advance the class will be canceled.\n\nDirections: Knox Makers parking and entrance is located in the fenced area around the back of the SPARK building.\n\nKnox Makers is a place for the Knoxville area’s engineers\, artists\, hobbyists\, innovators\, educators and entrepreneurs to work and play. We are a technology and art collective dedicated to the promotion of creativity enabled and informed by science. Our lectures\, workshops\, and outreach programs inspire and educate both members and the general public. Our workshop provides members with both the space for large projects and the tools to complete them. We are a non-profit educational organization supported by member dues and staffed by volunteers. LOCATION:Blacksmithing Zone\, Knox Makers - 116 Childress St SW\, Knoxville\, TN URL:https://events.knoxmakers.org/event/power-hammer-authorization-lg25-thumper-16 END:VEVENT BEGIN:VEVENT UID:event-7850-session-0@haxdb DTSTAMP:20260614T163024Z DTSTART:20260318T223000Z DTEND:20260319T013000Z SUMMARY:Woodworking 302 - Pen Turning DESCRIPTION:You MUST have completed Woodworking 102 - Woodturning Basics prior to taking this class. This class is a continuation of basic woodturning skills beyond spindles and it will include a brief safety reminder.\n\nLearn how to make a ball-point pen using wood or plastic resin barrel blanks. This class will cover how to prepare the materials for the pen’s barrel\, discuss and demonstrate additional materials and accessories\, and the final assembly and finishing methods commonly used. Pen kits and additional materials will be provided and participants will leave with a completed pen.\n\nClass members are encouraged to bring eye protection (full face shields are ideal. Do not wear any long\, loose-fitting clothing\, long sleeve shirts\, bracelets\, rings or low hanging neck chains. A hat would be appropriate if you don’t want to be picking woods chips out of your hair.\n\nThere is a minimum of 1 and a maximum of 4 attendees. If the minimum is not met 24 hours before class starts\, the class will be canceled and ticket purchases refunded.\n\n
\n\nDirections-  Knox Makers parking and entrance is located around the back of the SPARK building in the fenced in area.\n

Knox Makers is a place for the Knoxville area’s engineers\, artists\, hobbyists\, innovators\, educators and entrepreneurs to work and play. We are a technology and art collective dedicated to the promotion of creativity enabled and informed by science. Our lectures\, workshops\, and outreach programs inspire and educate both members and the general public. Our workshop provides members with both the space for large projects and the tools to complete them. We are a non-profit educational organization supported by member dues and staffed by volunteers.

LOCATION:Woodworking Zone\, Knox Makers - 116 Childress St SW\, Knoxville\, TN URL:https://events.knoxmakers.org/event/woodworking-302-pen-turning-6 END:VEVENT BEGIN:VEVENT UID:event-7857-session-0@haxdb DTSTAMP:20260614T163024Z DTSTART:20260319T220000Z DTEND:20260320T010000Z SUMMARY:Simple Leather Bag DESCRIPTION:Learn how to create a simple leather drawstring bag. In this class your instructor\, Earl\, will lead you through how to select\, cut\, glue\, punch\, and hand sew your very own leather drawstring bag. This class is intended for people new to leather crafting that are interested in learning more about the basics of the craft. All materials are provided.\n\n \;\n\nPlease note\, on the final step\, sewing\, participants will be provided with two options:\n\n \;\n\nThere is a minimum of 1 and a maximum of 4 attendees. If the minimum is not met 24 hours before class starts\, the class will be canceled.\n\n \; LOCATION:Fiber Arts Zone\, Knox Makers - 116 Childress St SW\, Knoxville\, TN URL:https://events.knoxmakers.org/event/simple-leather-bag END:VEVENT BEGIN:VEVENT UID:event-7851-session-0@haxdb DTSTAMP:20260614T163024Z DTSTART:20260319T230000Z DTEND:20260320T010000Z SUMMARY:As the Lathe Turns DESCRIPTION:Anything and everything about woodturning is possible at As The Lathe Turns. Discussions and demonstrations\, Tools and tips. Hacks and help. Thinking about buying a lathe but you don't know which one? What's the best tool for hollowing a bowl or box? Not sure about that special piece of wood\, how to cut it and mount it on the lathe? Woodturners (and wannabe woodturners) talking with other woodturners about woodturning.\n\nClass members are encouraged to bring eye protection (full face shields are ideal. Do not wear any long\, loose-fitting clothing\, long sleeve shirts\, bracelets\, rings or low hanging neck chains. A hat would be appropriate if you don’t want to be picking woods chips out of your hair.\n\nThis is a free hang out session dedicated to wood turning. Come happy and leave with rounded things.\n\nThis month's theme\, square bowl challenge and green wood demo.\n\n
\n\nDirections-  Knox Makers parking and entrance is located around the back of the SPARK building in the fenced in area.\n

Knox Makers is a place for the Knoxville area’s engineers\, artists\, hobbyists\, innovators\, educators and entrepreneurs to work and play. We are a technology and art collective dedicated to the promotion of creativity enabled and informed by science. Our lectures\, workshops\, and outreach programs inspire and educate both members and the general public. Our workshop provides members with both the space for large projects and the tools to complete them. We are a non-profit educational organization supported by member dues and staffed by volunteers.

LOCATION:Woodworking Zone\, Knox Makers - 116 Childress St SW\, Knoxville\, TN URL:https://events.knoxmakers.org/event/as-the-lathe-turns-19 END:VEVENT BEGIN:VEVENT UID:event-7817-session-0@haxdb DTSTAMP:20260614T163024Z DTSTART:20260319T233000Z DTEND:20260320T010000Z SUMMARY:New Members Onboarding DESCRIPTION:Whether you’re a current member\, trial member\, or prospective member\, you’re welcome to join us at this month’s New Member Onboarding!\n\nWe’ll start with a brief overview of Knox Makers’ origins and purpose and talk about how the organization works. You’ll learn a bit about the resources available to members and about the path to membership. Afterwards\, we’ll hang out and socialize.\n\nThe focus is on new members\, but longer-term members are encouraged to come and meet new folks.\n\n \;\n\nDirections- Knox Makers parking and entrance is located around the back of the SPARK building in the fenced in area.\n\nKnox Makers is a place for the Knoxville area’s engineers\, artists\, hobbyists\, innovators\, educators and entrepreneurs to work and play. We are a technology and art collective dedicated to the promotion of creativity enabled and informed by science. Our lectures\, workshops\, and outreach programs inspire and educate both members and the general public. Our workshop provides members with both the space for large projects and the tools to complete them. We are a non-profit educational organization supported by member dues and staffed by volunteers. LOCATION:Classroom\, Knox Makers - 116 Childress St SW\, Knoxville\, TN URL:https://events.knoxmakers.org/event/new-members-onboarding-110 END:VEVENT BEGIN:VEVENT UID:event-7864-session-0@haxdb DTSTAMP:20260614T163024Z DTSTART:20260320T223000Z DTEND:20260321T003000Z SUMMARY:CAM Jam! DESCRIPTION:Don’t let the name fool you\, while the end goal is more folks who can whip up their own CAM jobs this meetup targets ALL aspects of FreeCAD! Want to level up your 3D printing game and design your own stuff\, even multi-color? Have a cabinet or furniture build that you’d really like to nail down before putting saw to wood? Proficient in Fusion 360 or another CAD program and want to make the leap to our preferred FOSS solution? Have that elusive Nibblerbot 101 under your belt and not sure where to go from there? For all those and more let’s get together and figure it out!\n\nThis meetup will evolve but at the very least we’ll share tips\, tricks\, and other resources amongst ourselves. We’ll help each other over humps in our own working designs that we’re stuck on. Our resident FreeCAD maintainer Billy can give us the scoop on the latest changes in the pipeline for FreeCAD. Occasionally we could do a CAD-a-long with a preselected project to walk folks through a simple design from start to finish. Those are just some opening ideas\, share your own in the FreeCAD or CNC channels!\n\nWhether you’re brand spanking new and need help installing FreeCAD or perhaps a bit seasoned and have some knowledge nuggets to share with the rest of us ALL skill levels are welcome! And while not necessary\, having a laptop with FreeCAD loaded would be helpful (there are a limited number of shop laptops with FreeCAD installed). Check out the FreeCAD wiki for details on the current version we’re using as well as other details. LOCATION:Classroom\, Knox Makers - 116 Childress St SW\, Knoxville\, TN URL:https://events.knoxmakers.org/event/cam-jam END:VEVENT BEGIN:VEVENT UID:event-7831-session-0@haxdb DTSTAMP:20260614T163024Z DTSTART:20260321T140000Z DTEND:20260321T160000Z SUMMARY:Moonraker 101 DESCRIPTION:This is an introduction class to our CO2 laser cutter\, Moonraker. Tracy will lead attendees of this class as they learn the basics of laser cutting\, make a simple design\, and then engrave and cut out the design using the laser cutter in our space. This class is intended for members who have not yet been authorized to use Moonraker or need/want a review of its operation.Laptops will be provided for this class.\n\nHelp installing the software on your own laptop can be provided outside of class.In class we will be using Inkscape and the laser cutting extension bundle we’ve put together for it on the member laptops.\n\nYou can find Inkscape at: https://inkscape.org/\nYou can find the KM-Laser bundle at: https://github.com/KnoxMakers/KM-Laser\n\n
\n\nDirections-  Knox Makers parking and entrance is located around the back of the SPARK building in the fenced in area.\n\nKnox Makers is a place for the Knoxville area’s engineers\, artists\, hobbyists\, innovators\, educators and entrepreneurs to work and play. We are a technology and art collective dedicated to the promotion of creativity enabled and informed by science. Our lectures\, workshops\, and outreach programs inspire and educate both members and the general public. Our workshop provides members with both the space for large projects and the tools to complete them. We are a non-profit educational organization supported by member dues and staffed by volunteers.\n\n \; LOCATION:Classroom\, Knox Makers - 116 Childress St SW\, Knoxville\, TN URL:https://events.knoxmakers.org/event/moonraker-101-23 END:VEVENT BEGIN:VEVENT UID:event-7762-session-0@haxdb DTSTAMP:20260614T163024Z DTSTART:20260321T170000Z DTEND:20260321T200000Z SUMMARY:Stitch n Bitch DESCRIPTION:If you are fiber-curious\, come see what others are working on. We have members who sew clothing and costumes\, knit\, crochet\, weave\, quilt\, embroider\, and many other bitch-and-stitch arts.\n\nOur monthly meeting is meant to be a time to relax and indulge in any or all fiber arts hobbies. Whether you’re an expert or a novice come hang out for all or any part of the fiber fun.\n\nBring a friend if you want. RSVP is not required\, just show up when you can and stay however long you can.\n\nDirections-  Knox Makers parking and entrance is located around the back of the SPARK building in the fenced in area.\n\nKnox Makers is a place for the Knoxville area’s engineers\, artists\, hobbyists\, innovators\, educators and entrepreneurs to work and play. We are a technology and art collective dedicated to the promotion of creativity enabled and informed by science. Our lectures\, workshops\, and outreach programs inspire and educate both members and the general public. Our workshop provides members with both the space for large projects and the tools to complete them. We are a non-profit educational organization supported by member dues and staffed by volunteers. LOCATION:Fiber Arts Zone\, Knox Makers - 116 Childress St SW\, Knoxville\, TN URL:https://events.knoxmakers.org/event/stitch-n-bitch-38 END:VEVENT BEGIN:VEVENT UID:event-7832-session-0@haxdb DTSTAMP:20260614T163024Z DTSTART:20260321T180000Z DTEND:20260321T200000Z SUMMARY:Crossbow 101 DESCRIPTION:This is an introduction class to our Fiber laser cutter\, Crossbow. Jondale will lead attendees of this class as they learn the basics of fiber lasers\, make a simple design\, and then engrave it using Crossbow. This class is intended for members who have not yet been authorized to use Crossbow or need/want a review of its operation. Laptops will be provided for this class.\n\nHelp installing the software on your own laptop can be provided outside of class. In class we will be using Meerk40t on the member laptops to design for and run the laser.\n\n
\n\nDirections-  Knox Makers parking and entrance is located around the back of the SPARK building in the fenced in area.\n\nKnox Makers is a place for the Knoxville area’s engineers\, artists\, hobbyists\, innovators\, educators and entrepreneurs to work and play. We are a technology and art collective dedicated to the promotion of creativity enabled and informed by science. Our lectures\, workshops\, and outreach programs inspire and educate both members and the general public. Our workshop provides members with both the space for large projects and the tools to complete them. We are a non-profit educational organization supported by member dues and staffed by volunteers.\n\n \; LOCATION:Classroom\, Knox Makers - 116 Childress St SW\, Knoxville\, TN URL:https://events.knoxmakers.org/event/crossbow-101-23 END:VEVENT BEGIN:VEVENT UID:event-7869-session-0@haxdb DTSTAMP:20260614T163024Z DTSTART:20260322T140000Z DTEND:20260322T170000Z SUMMARY:Blacksmithing Authorization – Intro to Forging DESCRIPTION:This class introduces you to the new blacksmithing zone. We cover propane forge operation\, zone safety\, basic hand forging\, and nail making. At the completion of the class\, members will receive a key to access the forge and foundry building.\n\nProper attire is natural fiber clothing such as cotton jeans and T-shirts. Cotton/polyester blend is OK but synthetic clothing or other materials that can melt are unsafe. We have eye protection available but suggest you bring your own if you have them.\n\nThis class is for members only and costs $11.96. There will be a 5 person maximum and a 2 person minimum. If the minimum isn’t met 24 hours in advance the class will be canceled.\n\nDirections: Knox Makers parking and entrance is located in the fenced area around the back of the SPARK building.\n\nKnox Makers is a place for the Knoxville area’s engineers\, artists\, hobbyists\, innovators\, educators and entrepreneurs to work and play. We are a technology and art collective dedicated to the promotion of creativity enabled and informed by science. Our lectures\, workshops\, and outreach programs inspire and educate both members and the general public. Our workshop provides members with both the space for large projects and the tools to complete them. We are a non-profit educational organization supported by member dues and staffed by volunteers. LOCATION:Blacksmithing Zone\, Knox Makers - 116 Childress St SW\, Knoxville\, TN URL:https://events.knoxmakers.org/event/blacksmithing-authorization-intro-to-forging-56 END:VEVENT BEGIN:VEVENT UID:event-7861-session-0@haxdb DTSTAMP:20260614T163024Z DTSTART:20260322T170000Z DTEND:20260322T190000Z SUMMARY:Learn to Solder and Build an Optical Theremin DESCRIPTION:Can you hear Carnegie Hall calling? In this class Issac and Ray will teach basic through hole and surface mount soldering tools and techniques. How will we do this? By building a most practical professional performance instrument called a musical optical theremin. Think of something you can maybe make spooky ghost sounds for a Scooby-Doo episode\, if you practice enough.\n\nThis custom designed project features 12 through-hole solder joints\, 36 SMT solder joints\, and 32 practice SMT solder joints with 0603 through 1206 size components.\n\nTwo instructors will be present to guide the build and provide soldering and troubleshooting tips. We have invested in digital microscopes and quality solder irons for use by each attendee\, creating a very good experience for new and experienced makers alike.\n\nNo prior experience is needed\, all tools and supplies will be provided\, just come ready to have fun.\n\nAll proceeds go to Knox Makers.\n\n
\n\nDirections- Knox Makers parking and entrance is located around the back of the SPARK building in the fenced in area.\n\nKnox Makers is a place for the Knoxville area’s engineers\, artists\, hobbyists\, innovators\, educators and entrepreneurs to work and play. We are a technology and art collective dedicated to the promotion of creativity enabled and informed by science. Our lectures\, workshops\, and outreach programs inspire and educate both members and the general public. Our workshop provides members with both the space for large projects and the tools to complete them. We are a non-profit educational organization supported by member dues and staffed by volunteers. LOCATION:Classroom\, Knox Makers - 116 Childress St SW\, Knoxville\, TN URL:https://events.knoxmakers.org/event/learn-to-solder-and-build-an-optical-theremin END:VEVENT BEGIN:VEVENT UID:event-7854-session-0@haxdb DTSTAMP:20260614T163024Z DTSTART:20260322T200000Z DTEND:20260322T213000Z SUMMARY:Microcontrollers\, State Machines and Rotary Encoders DESCRIPTION:

Rotary encoders are a very nice user interface for many projects. Unfortunately they are tricky to use which often results in missed pulses or doubled pulses and a frustrating interface. In this class we will implement a robust hardware and firmware solution for encoders.

\nAttendees will learn:\n\nWe will use the Arduino IDE\, writing code in C. Code will be specific to the microcontroller used (most likely be either a Nano or Pico 2) but can fairly easily be translated to other platforms.\n\nPrior experience required: You should understand how setup() and loop() work\, some basic C syntax\, and using GPIOs as outputs (e.g. DigitalWrite()) and as inputs (e.g. DigitalRead()). It may be helpful to read a brief tutorial on interrupt service routines. They will be explained in class but prior exposure may make it easier to digest on the fly.\n\nAll proceeds go to Knox Makers.\n\n
\n\nDirections- Knox Makers parking and entrance is located around the back of the SPARK building in the fenced in area.\n\nKnox Makers is a place for the Knoxville area’s engineers\, artists\, hobbyists\, innovators\, educators and entrepreneurs to work and play. We are a technology and art collective dedicated to the promotion of creativity enabled and informed by science. Our lectures\, workshops\, and outreach programs inspire and educate both members and the general public. Our workshop provides members with both the space for large projects and the tools to complete them. We are a non-profit educational organization supported by member dues and staffed by volunteers. LOCATION:Classroom\, Knox Makers - 116 Childress St SW\, Knoxville\, TN URL:https://events.knoxmakers.org/event/microcontrollers-state-machines-and-rotary-encoders END:VEVENT BEGIN:VEVENT UID:event-7830-session-0@haxdb DTSTAMP:20260614T163024Z DTSTART:20260325T220000Z DTEND:20260326T013000Z SUMMARY:Make Stained Glass Earrings and Charms DESCRIPTION:Join Ashley in using stained glass to make your own set of earrings and charms. Participants will go home with their own set of earrings and charms made from the finest collection of scrap glass in south Knoxville. LOCATION:Arts & Crafts Zone\, Knox Makers - 116 Childress St SW\, Knoxville\, TN URL:https://events.knoxmakers.org/event/make-stained-glass-earrings-and-charms END:VEVENT BEGIN:VEVENT UID:event-7866-session-0@haxdb DTSTAMP:20260614T163024Z DTSTART:20260326T220000Z DTEND:20260327T000000Z SUMMARY:Tumbled Glass Art DESCRIPTION:Join Brooke and learn how to use pieces of tumbled glass to make your own piece of art. Everyone will go home with their own tumbled glass piece ready to be proudly displayed. LOCATION:Arts & Crafts Zone\, Knox Makers - 116 Childress St SW\, Knoxville\, TN URL:https://events.knoxmakers.org/event/tumbled-glass-art END:VEVENT BEGIN:VEVENT UID:event-7876-session-0@haxdb DTSTAMP:20260614T163024Z DTSTART:20260328T140000Z DTEND:20260328T170000Z SUMMARY:Woodworking 101 DESCRIPTION:This class will cover topics related to safe and correct operation of equipment within the woodworking area\, as well as some shop etiquette guidelines. This is the authorization class for the area and is required prior to using the equipment. Safe practices will be demonstrated and learned by a hands on approach in the context of taking rough lumber through the process of milling and operation of all equipment in the space. If you have previously paid and attended a wood authorization class then we encourage you to audit the class free of charge at any time.\n\nThe cost is $24.96 for Knox Makers members\, $39.96 for General Public. There will be a maximum of 6 spots of this class\, and a minimum of 3 tickets must be sold. If the class minimum is not met 48 hours prior to class start time\, the class we be canceled and all tickets will be refunded.\n\nDirections- Knox Makers parking and entrance is located around the back of the SPARK building in the fenced in area.\n\nKnox Makers is a place for the Knoxville area’s engineers\, artists\, hobbyists\, innovators\, educators and entrepreneurs to work and play. We are a technology and art collective dedicated to the promotion of creativity enabled and informed by science. Our lectures\, workshops\, and outreach programs inspire and educate both members and the general public. Our workshop provides members with both the space for large projects and the tools to complete them. We are a non-profit educational organization supported by member dues and staffed by volunteers. LOCATION:Woodworking Zone\, Knox Makers - 116 Childress St SW\, Knoxville\, TN URL:https://events.knoxmakers.org/event/woodworking-101-85 END:VEVENT BEGIN:VEVENT UID:event-7787-session-0@haxdb DTSTAMP:20260614T163024Z DTSTART:20260328T160000Z DTEND:20260328T200000Z SUMMARY:Pane and Gain DESCRIPTION:It’s that time again! Join us for Pane and Gain\, open workshop hours for stained glass artists of all levels. Whether you’re a total beginner ready to learn the basics or a seasoned artist continuing your own projects\, this is the perfect space to create\, learn\, and connect. Drop in\, work at your own pace\, and have fun with fellow glass enthusiasts! LOCATION:Arts & Crafts Zone\, Knox Makers - 116 Childress St SW\, Knoxville\, TN URL:https://events.knoxmakers.org/event/pane-and-gain END:VEVENT BEGIN:VEVENT UID:event-7860-session-0@haxdb DTSTAMP:20260614T163024Z DTSTART:20260328T170000Z DTEND:20260328T200000Z SUMMARY:Introduction to Hand Embroidery DESCRIPTION:

You will learn seven basic embroidery stitches in a 3" x 6" layout. Four larger motifs will help you learn how to work the stitches in combination. You can either frame the work as is\; or finish it into a needle book and start storing all your needles and pins in one location.

\n\n\n
\n\nDirections- Knox Makers parking and entrance is located around the back of the SPARK building in the fenced in area. Hint: Use Brady Street in maps.\n\nKnox Makers is a place for the Knoxville area’s engineers\, artists\, hobbyists\, innovators\, educators and entrepreneurs to work and play. We are a technology and art collective dedicated to the promotion of creativity enabled and informed by science. Our lectures\, workshops\, and outreach programs inspire and educate both members and the general public. Our workshop provides members with both the space for large projects and the tools to complete them. We are a non-profit educational organization supported by member dues and staffed by volunteers. LOCATION:Fiber Arts Zone\, Knox Makers - 116 Childress St SW\, Knoxville\, TN URL:https://events.knoxmakers.org/event/introduction-to-hand-embroidery END:VEVENT BEGIN:VEVENT UID:event-7875-session-0@haxdb DTSTAMP:20260614T163024Z DTSTART:20260329T160000Z DTEND:20260329T200000Z SUMMARY:Intro to Metalworking (MIG 101) DESCRIPTION:This is the basic authorization class for using the Metalworking Shop and the MIG Welder. We will cover lots of safety and learn the metal shop tools\, then we’ll move to hands-on setup and shared MIG welding time.  This class can run later than predicted depending on student's needs.\n\nProper attire is natural fiber clothing such as cotton jeans and T-shirts. Close toed shoes or boots and long pants are mandatory. NO spandex or “tech” style clothes made from nylon/polyester nor are shorts/skirts allowed. Students may bring their own PPE (Personal Protective Equipment\,) welding shield and gloves if they wish - but these are NOT required as we have setups for everyone to use.\n\nJoe Hall will be the instructor.\n\nThe cost is $24.96 for Knox Makers members\, $49.96 for General Public.\n\nDirections- Knox Makers parking and entrance is located around the back of the SPARK building in the fenced in area.\n\nKnox Makers is a place for the Knoxville area’s engineers\, artists\, hobbyists\, innovators\, educators and entrepreneurs to work and play. We are a technology and art collective dedicated to the promotion of creativity enabled and informed by science. Our lectures\, workshops\, and outreach programs inspire and educate both members and the general public. Our workshop provides members with both the space for large projects and the tools to complete them. We are a non-profit educational organization supported by member dues and staffed by volunteers. LOCATION:Metalworking Zone\, Knox Makers - 116 Childress St SW\, Knoxville\, TN URL:https://events.knoxmakers.org/event/intro-to-metalworking-mig-101-35 END:VEVENT BEGIN:VEVENT UID:event-7895-session-0@haxdb DTSTAMP:20260614T163024Z DTSTART:20260331T223000Z DTEND:20260401T003000Z SUMMARY:Show and Share – Public Welcome DESCRIPTION:Open hack nights are a chance for people to come out to Knox Makers and hack on anything at any skill level. You can come out to practice a new programming language\, get help working on your personal projects\, or try your hand at using the 3d printer. You might just come out to see what other folks are working on and lend a hand. If you know anyone who has been curious to come out to Knox Makers\, please invite them along! \nLike all other Tuesday nights\, this event is free and open to the public. Our night will begin with a Show and Share where attendees are encouraged to bring out the projects they have been working on. This is a great time to request feedback for the future direction of your project\, or you can just bring out something you want to show off. We hope to see you there! \n \n**Directions-  Knox Makers parking and entrance is located around the back of the SPARK building in the fenced in area.** \n \nKnox Makers is a place for the Knoxville area’s engineers\, artists\, hobbyists\, innovators\, educators and entrepreneurs to work and play. We are a technology and art collective dedicated to the promotion of creativity enabled and informed by science. Our lectures\, workshops\, and outreach programs inspire and educate both members and the general public. Our workshop provides members with both the space for large projects and the tools to complete them. We are a non-profit educational organization supported by member dues and staffed by volunteers. LOCATION:Classroom\, Knox Makers - 116 Childress St SW\, Knoxville\, TN URL:https://events.knoxmakers.org/event/show-and-share-public-welcome-2 END:VEVENT BEGIN:VEVENT UID:event-7874-session-0@haxdb DTSTAMP:20260614T163024Z DTSTART:20260331T233000Z DTEND:20260401T003000Z SUMMARY:Make A Book Safe DESCRIPTION:Turn an ordinary hardcover book into a secret stash spot in this hands‑on project! You’ll watch how to hollow out a book on the bandsaw\, then we will show you how to reinforce the pages and finish the book. At the end of the night\, you’ll go home with a finished hidden book safe that is sturdy enough to actually use\, not just look cute on a shelf!\n\nWhat to bring:\n\nOne hardcover book you’re willing to sacrifice (at least 1.25" thick is ideal). But\, don't worry! We have a collection of books available if you are without. Skill level needed:\n\nAbsolute beginner as we teach everything required. Bandsaw auth not necessary as the teacher will perform that duty\, but if you want to make more in the future you will need to have completed that authorization class. LOCATION:Classroom\, Knox Makers - 116 Childress St SW\, Knoxville\, TN URL:https://events.knoxmakers.org/event/make-a-book-safe END:VEVENT BEGIN:VEVENT UID:event-7879-session-0@haxdb DTSTAMP:20260614T163024Z DTSTART:20260401T223000Z DTEND:20260402T013000Z SUMMARY:Woodworking 102 - Woodturning Authorization DESCRIPTION:This is the basic authorization class for using the wood lathes in the wood working zone. In this class Randy will spend the majority of the class covering the basics of how to operate our wood lathes safely\, how to sharpen lathe tools\, and a demonstration turning a spindle\, going over what was taught. Some examples of spindles include table and chair legs\, baseball bats\, and candle sticks. You will be shown how to prepare and mount the wood on the lathe. There will be a demonstration of how to use and sharpen the tools that are appropriate for turning spindles. \n \nClass members are encouraged to bring eye protection (full face shields are ideal. Do not wear any long\, loose-fitting clothing\, long sleeve shirts\, bracelets\, rings or low hanging neck chains. A hat would be appropriate if you don’t want to be picking woods chips out of your hair. \n \nThere is a minimum of 1 and a maximum of 6 attendees. If the minimum is not met 24 hours before class starts\, the class will be canceled and ticket purchases refunded. \n \n*** \n \nDirections-  Knox Makers parking and entrance is located around the back of the SPARK building in the fenced in area. \nKnox Makers is a place for the Knoxville area’s engineers\, artists\, hobbyists\, innovators\, educators and entrepreneurs to work and play. We are a technology and art collective dedicated to the promotion of creativity enabled and informed by science. Our lectures\, workshops\, and outreach programs inspire and educate both members and the general public. Our workshop provides members with both the space for large projects and the tools to complete them. We are a non-profit educational organization supported by member dues and staffed by volunteers. LOCATION:Woodworking Zone\, Knox Makers - 116 Childress St SW\, Knoxville\, TN URL:https://events.knoxmakers.org/event/woodworking-102-woodturning-authorization END:VEVENT BEGIN:VEVENT UID:event-7871-session-0@haxdb DTSTAMP:20260614T163024Z DTSTART:20260402T180000Z DTEND:20260402T200000Z SUMMARY:Carve a Simple Wooden Spoon DESCRIPTION:This class is a beginner level class.  We will carve a simple wooden spoon. The spoon is to be functional and not ornamental.  Our spoons will be carved from basswood. Basswood is considered a hardwood\, but is soft\, has very little grain\, and is easy to carve.  This will allow the student to use a gouge and knife with the least amount of energy.  It will increase the opportunity for success.   \nFor this class\, we will use a gouge to hollow out the bowl portion of the spoon and use a knife to shape the outside of the bowl and handle.   \n \nDiscussions at the beginning of the class will talk about the different types of carving tools and how to use them. For this class\, we will only use one gouge and a knife\, you will be exposed to different types of carving tools.   \n \nDuring our initial discussion\, we will discuss sharpening techniques as well.  For this class\, we will not sharpen any tools\, but you will be introduced to different processes for sharpening.  Sharp tools are a requirement for creating nice looking carvings.  Dull tools will tear wood and make your carving less visually appealing. \n \nWhat you need to bring to the class: \n \nFor this class\, all supplies will be provided.  You do not need to bring materials to the class. \n \n
\n LOCATION:Woodworking Zone\, Knox Makers - 116 Childress St SW\, Knoxville\, TN URL:https://events.knoxmakers.org/event/carve-a-simple-wooden-spoon END:VEVENT BEGIN:VEVENT UID:event-7872-session-0@haxdb DTSTAMP:20260614T163024Z DTSTART:20260402T223000Z DTEND:20260403T003000Z SUMMARY:Carve a Simple Wooden Spoon DESCRIPTION:This class is a beginner level class.  We will carve a simple wooden spoon. The spoon is to be functional and not ornamental.  Our spoons will be carved from basswood. Basswood is considered a hardwood\, but is soft\, has very little grain\, and is easy to carve.  This will allow the student to use a gouge and knife with the least amount of energy.  It will increase the opportunity for success.   \nFor this class\, we will use a gouge to hollow out the bowl portion of the spoon and use a knife to shape the outside of the bowl and handle. \n \nDiscussions at the beginning of the class will talk about the different types of carving tools and how to use them. For this class\, we will only use one gouge and a knife\, you will be exposed to different types of carving tools. \n \nDuring our initial discussion\, we will discuss sharpening techniques as well.  For this class\, we will not sharpen any tools\, but you will be introduced to different processes for sharpening.  Sharp tools are a requirement for creating nice looking carvings.  Dull tools will tear wood and make your carving less visually appealing. \n \nWhat you need to bring to the class: \n \nFor this class\, all supplies will be provided.  You do not need to bring materials to the class. \n \n
\n LOCATION:Woodworking Zone\, Knox Makers - 116 Childress St SW\, Knoxville\, TN URL:https://events.knoxmakers.org/event/carve-a-simple-wooden-spoon-2 END:VEVENT BEGIN:VEVENT UID:event-7885-session-0@haxdb DTSTAMP:20260614T163024Z DTSTART:20260404T120000Z DTEND:20260404T140000Z SUMMARY:Moonraker 101 DESCRIPTION:This is an introduction class to our CO2 laser cutter\, Moonraker. Tracy will lead attendees of this class as they learn the basics of laser cutting\, make a simple design\, and then engrave and cut out the design using the laser cutter in our space. This class is intended for members who have not yet been authorized to use Moonraker or need/want a review of its operation.Laptops will be provided for this class. \nHelp installing the software on your own laptop can be provided outside of class.In class we will be using Inkscape and the laser cutting extension bundle we’ve put together for it on the member laptops. \nYou can find Inkscape at: https://inkscape.org/ \nYou can find the KM-Laser bundle at: https://github.com/KnoxMakers/KM-Laser LOCATION:Classroom\, Knox Makers - 116 Childress St SW\, Knoxville\, TN URL:https://events.knoxmakers.org/event/moonraker-101-24 END:VEVENT BEGIN:VEVENT UID:event-7884-session-0@haxdb DTSTAMP:20260614T163024Z DTSTART:20260404T140000Z DTEND:20260404T160000Z SUMMARY:Crossbow 101 DESCRIPTION:This is an introduction class to our Fiber laser cutter\, Crossbow. Jondale will lead attendees of this class as they learn the basics of fiber lasers\, make a simple design\, and then engrave it using Crossbow. This class is intended for members who have not yet been authorized to use Crossbow or need/want a review of its operation. Laptops will be provided for this class. \n \nHelp installing the software on your own laptop can be provided outside of class. In class we will be using Meerk40t on the member laptops to design for and run the laser. \n \n*** \n \nDirections-  Knox Makers parking and entrance is located around the back of the SPARK building in the fenced in area. \n \nKnox Makers is a place for the Knoxville area’s engineers\, artists\, hobbyists\, innovators\, educators and entrepreneurs to work and play. We are a technology and art collective dedicated to the promotion of creativity enabled and informed by science. Our lectures\, workshops\, and outreach programs inspire and educate both members and the general public. Our workshop provides members with both the space for large projects and the tools to complete them. We are a non-profit educational organization supported by member dues and staffed by volunteers. LOCATION:Classroom\, Knox Makers - 116 Childress St SW\, Knoxville\, TN URL:https://events.knoxmakers.org/event/crossbow-101-24 END:VEVENT BEGIN:VEVENT UID:event-7839-session-0@haxdb DTSTAMP:20260614T163024Z DTSTART:20260404T170000Z DTEND:20260404T200000Z SUMMARY:Quilty Pleasures DESCRIPTION:Join us for an afternoon devoted to quilting! Bring your current project—whether you’re chain piecing\, working on HSTs\, squaring up blocks\, or diving into English or foundation paper piecing. Maybe you’re hand quilting or finishing up a binding—whatever you’re working on\, bring it along! \n \nWe’re all about learning\, sharing\, and enjoying some creative time together. It doesn't matter if you're just starting your quilting journey or have been enjoying the craft for decades\, all are welcome for a casual afternoon of fun\, shared stories and stitches. \n \n
\n
\nBring a friend if you want. RSVP is not required\, just show up when you can and stay however long you can. \n \nDirections-  Knox Makers parking and entrance is located around the back of the SPARK building in the fenced in area. Use Brady Street in map apps \n \nKnox Makers is a place for the Knoxville area’s engineers\, artists\, hobbyists\, innovators\, educators and entrepreneurs to work and play. We are a technology and art collective dedicated to the promotion of creativity enabled and informed by science. Our lectures\, workshops\, and outreach programs inspire and educate both members and the general public. Our workshop provides members with both the space for large projects and the tools to complete them. We are a non-profit educational organization supported by member dues and staffed by volunteers. LOCATION:Classroom\, Knox Makers - 116 Childress St SW\, Knoxville\, TN URL:https://events.knoxmakers.org/event/quilty-pleasures-3 END:VEVENT BEGIN:VEVENT UID:event-7905-session-0@haxdb DTSTAMP:20260614T163024Z DTSTART:20260404T180000Z DTEND:20260404T210000Z SUMMARY:Woodworking 103 - Bandsaw authorization DESCRIPTION:Learn how to use the three bandsaws in the woodworking zone safely and effectively. Operation will include: how to avoid damaging the bandsaw blade\, when it requires replacement and how to do that\; how to adjust the blade guard and guides. Which materials can be cut and the appropriate type/size blade to use and those which must never be cut on these bandsaws. There will be discussions and demonstrations regarding how to re-saw thick wood into thinner boards and how to safely cut round and odd-shaped pieces of wood. Participants will have the opportunity for hands-on experience bandsawing a piece of wood. Dust masks are recommended.\n\nThe cost is $24.96 for Knox Makers members\, $39.96 for General Public. There will be a maximum of 8 spots of this class\, and a minimum of 2 tickets must be sold. If the class minimum is not met 24 hours prior to class start time\, the class we be canceled and all tickets will be refunded.\n\nDirections- Knox Makers parking and entrance is located around the back of the SPARK building in the fenced in area.\n\nKnox Makers is a place for the Knoxville area’s engineers\, artists\, hobbyists\, innovators\, educators and entrepreneurs to work and play. We are a technology and art collective dedicated to the promotion of creativity enabled and informed by science. Our lectures\, workshops\, and outreach programs inspire and educate both members and the general public. Our workshop provides members with both the space for large projects and the tools to complete them. We are a non-profit educational organization supported by member dues and staffed by volunteers. LOCATION:Woodworking Zone\, Knox Makers - 116 Childress St SW\, Knoxville\, TN URL:https://events.knoxmakers.org/event/woodworking-103-bandsaw-authorization-17 END:VEVENT BEGIN:VEVENT UID:event-7908-session-0@haxdb DTSTAMP:20260614T163024Z DTSTART:20260406T223000Z DTEND:20260407T013000Z SUMMARY:Embroidery Machine Auth DESCRIPTION:This is the authorization class needed to use the Brother Innov-is NQ1700E Embroidery Machine. The general format of the class covers choosing the right stabilizer and needle for your project\, hooping\, designing and stitching it. A hands-on approach will show the basics of how to turn the preloaded text and images into fabric art.\n\nFor the more advanced\, loading up a pes file format embroidery design of your own will be covered. Class time will vary depending on number of questions and skill level of participants. LOCATION:Fiber Arts Zone\, Knox Makers - 116 Childress St SW\, Knoxville\, TN URL:https://events.knoxmakers.org/event/embroidery-machine-auth-56 END:VEVENT BEGIN:VEVENT UID:event-7919-session-0@haxdb DTSTAMP:20260614T163024Z DTSTART:20260407T223000Z DTEND:20260408T013000Z SUMMARY:Show and Share – Public Welcome DESCRIPTION:Open hack nights are a chance for people to come out to Knox Makers and hack on anything at any skill level. You can come out to practice a new programming language\, get help working on your personal projects\, or try your hand at using the 3d printer. You might just come out to see what other folks are working on and lend a hand. If you know anyone who has been curious to come out to Knox Makers\, please invite them along! \nLike all other Tuesday nights\, this event is free and open to the public. Our night will begin with a Show and Share where attendees are encouraged to bring out the projects they have been working on. This is a great time to request feedback for the future direction of your project\, or you can just bring out something you want to show off. We hope to see you there! \n \n**Directions-  Knox Makers parking and entrance is located around the back of the SPARK building in the fenced in area.** \n \nKnox Makers is a place for the Knoxville area’s engineers\, artists\, hobbyists\, innovators\, educators and entrepreneurs to work and play. We are a technology and art collective dedicated to the promotion of creativity enabled and informed by science. Our lectures\, workshops\, and outreach programs inspire and educate both members and the general public. Our workshop provides members with both the space for large projects and the tools to complete them. We are a non-profit educational organization supported by member dues and staffed by volunteers. LOCATION:Classroom\, Knox Makers - 116 Childress St SW\, Knoxville\, TN URL:https://events.knoxmakers.org/event/show-and-share-public-welcome-3 END:VEVENT BEGIN:VEVENT UID:event-7886-session-0@haxdb DTSTAMP:20260614T163024Z DTSTART:20260407T233000Z DTEND:20260407T133000Z SUMMARY:New Member Onboarding DESCRIPTION:Whether you’re a current member\, trial member\, or prospective member\, you’re welcome to join us at this month’s New Member Onboarding! \nWe’ll start with a brief overview of Knox Makers’ origins and purpose and talk about how the organization works. You’ll learn a bit about the resources available to members and about the path to membership. Afterwards\, we’ll hang out and socialize. \nThe focus is on new members\, but longer-term members are encouraged to come and meet new folks. LOCATION:Classroom\, Knox Makers - 116 Childress St SW\, Knoxville\, TN URL:https://events.knoxmakers.org/event/new-member-onboarding-11 END:VEVENT BEGIN:VEVENT UID:event-7889-session-0@haxdb DTSTAMP:20260614T163024Z DTSTART:20260408T223000Z DTEND:20260409T013000Z SUMMARY:Amigurumi Basics DESCRIPTION:Amigurumi is the art of knitting and crocheting small stuffed creatures. In this class\, you'll learn the basics of crochet amigurumi by making a jellyfish. Learn how to make a magic loop\, crochet in the round\, increase and decrease\, and join pieces together. Beginners are welcome\, even if this is your first crochet project!\n\nThe cost is $14.96 for Knox Makers members\, $24.96 for General Public. There will be a maximum of 6 spots for this class\, and a minimum of 2 tickets must be sold. If the class minimum is not met 48 hours prior to class start time\, the class will be canceled and all tickets will be refunded.\n\nDirections- Knox Makers parking and entrance is located around the back of the SPARK building in the fenced in area.\n\nKnox Makers is a place for the Knoxville area’s engineers\, artists\, hobbyists\, innovators\, educators and entrepreneurs to work and play. We are a technology and art collective dedicated to the promotion of creativity enabled and informed by science. Our lectures\, workshops\, and outreach programs inspire and educate both members and the general public. Our workshop provides members with both the space for large projects and the tools to complete them. We are a non-profit educational organization supported by member dues and staffed by volunteers. LOCATION:Fiber Arts Zone\, Knox Makers - 116 Childress St SW\, Knoxville\, TN URL:https://events.knoxmakers.org/event/amigurumi-basics-3 END:VEVENT BEGIN:VEVENT UID:event-7883-session-0@haxdb DTSTAMP:20260614T163024Z DTSTART:20260409T230000Z DTEND:20260410T003000Z SUMMARY:Intro to solder rework DESCRIPTION:There are several common techniques used to rework solder assembly. In this hands-on class\, attendees will learn how to perform hot air rework\, use solder braid\, manual solder suction\, vacuum solder suction\, and other methods for fixing the inevitable boo-boos we discover. The use of fluxes\, Pb and Pb-free solder\, helping hands and other tools will be covered. \n \nThis is not a project class\, this is a how-to where we will learn using prime choice circuit boards from our beloved hack rack. \n \n90 minutes allows this class to run at a relaxed pace. Attendance is limited to 3 so everyone will have significant hands on time. \n \nClass will be held in the Electronics Zone. \n \nAll proceeds go to Knox Makers. \n \n*** \n \nDirections- Knox Makers parking and entrance is located around the back of the SPARK building in the fenced in area. \n \nKnox Makers is a place for the Knoxville area’s engineers\, artists\, hobbyists\, innovators\, educators and entrepreneurs to work and play. We are a technology and art collective dedicated to the promotion of creativity enabled and informed by science. Our lectures\, workshops\, and outreach programs inspire and educate both members and the general public. Our workshop provides members with both the space for large projects and the tools to complete them. We are a non-profit educational organization supported by member dues and staffed by volunteers. LOCATION:Electronics Zone\, Knox Makers - 116 Childress St SW\, Knoxville\, TN URL:https://events.knoxmakers.org/event/intro-to-solder-rework-2 END:VEVENT BEGIN:VEVENT UID:event-7878-session-0@haxdb DTSTAMP:20260614T163024Z DTSTART:20260411T140000Z DTEND:20260411T170000Z SUMMARY:Woodworking 101 DESCRIPTION:This class will cover topics related to safe and correct operation of equipment within the woodworking area\, as well as some shop etiquette guidelines. This is the authorization class for the area and is required prior to using the equipment. Safe practices will be demonstrated and learned by a hands on approach in the context of taking rough lumber through the process of milling and operation of all equipment in the space. If you have previously paid and attended a wood authorization class then we encourage you to audit the class free of charge at any time. \n \nThe cost is $24.96 for Knox Makers members\, $39.96 for General Public. There will be a maximum of 8 spots of this class\, and a minimum of 3 tickets must be sold. If the class minimum is not met 48 hours prior to class start time\, the class we be canceled and all tickets will be refunded. \n \nDirections- Knox Makers parking and entrance is located around the back of the SPARK building in the fenced in area. \n \nKnox Makers is a place for the Knoxville area’s engineers\, artists\, hobbyists\, innovators\, educators and entrepreneurs to work and play. We are a technology and art collective dedicated to the promotion of creativity enabled and informed by science. Our lectures\, workshops\, and outreach programs inspire and educate both members and the general public. Our workshop provides members with both the space for large projects and the tools to complete them. We are a non-profit educational organization supported by member dues and staffed by volunteers. LOCATION:Woodworking Zone\, Knox Makers - 116 Childress St SW\, Knoxville\, TN URL:https://events.knoxmakers.org/event/woodworking-101-86 END:VEVENT BEGIN:VEVENT UID:event-7890-session-0@haxdb DTSTAMP:20260614T163024Z DTSTART:20260411T170000Z DTEND:20260411T200000Z SUMMARY:Intro to the Silhouette DESCRIPTION:Using Inkscape's add-on for the Silhouette\, you will print and cut your own color sticker using registration marks. We will walk through the trace commands and create two cut lines at different depths. The first will cut sticker paper\, the second cuts all the way through.  If time allows\, we will explore using other materials like cardstock\, vinyl and felt. These are the basic skills used to for Heat Transfer vinyl cutting. \n \nThere will be a fee of $9.96 for members.. There will be a maximum of 4 spots of this class\, and a minimum of 2 tickets must be sold. If the class minimum is not met 48 hours prior to class start time\, the class we be canceled and all tickets will be refunded. LOCATION:Classroom\, Knox Makers - 116 Childress St SW\, Knoxville\, TN URL:https://events.knoxmakers.org/event/intro-to-the-silhouette-7 END:VEVENT BEGIN:VEVENT UID:event-7934-session-0@haxdb DTSTAMP:20260614T163024Z DTSTART:20260411T180000Z DTEND:20260411T210000Z SUMMARY:Machining 100 – Intro To Machining DESCRIPTION:Billy will give you a basic introduction to the machining area. This class will begin with a tour of the machining area with a\, in-depth discussion of each tool\, it’s uses\, proper procedures\, and safety. At the end of this class\, all participating members will be authorized to use the drill press\, box pan brake\, handtools\, and the horizontal bandsaw.\n\n**This is a prerequisite for the Bridgeport Mill and Lathe tool authorization classes**\n\nThere will be a fee for this class of $14.96 for current Knox Makers members. There will be a maximum of 10 spots for this class\, and a minimum of 1 tickets must be sold. If the class minimum is not met 48 hours prior to class start time\, the class will be canceled and all tickets will be refunded.\n\nDirections- Knox Makers parking and entrance is located around the back of the SPARK building in the fenced in area.\n\nKnox Makers is a place for the Knoxville area’s engineers\, artists\, hobbyists\, innovators\, educators and entrepreneurs to work and play. We are a technology and art collective dedicated to the promotion of creativity enabled and informed by science. Our lectures\, workshops\, and outreach programs inspire and educate both members and the general public. Our workshop provides members with both the space for large projects and the tools to complete them. We are a non-profit educational organization supported by member dues and staffed by volunteers. LOCATION:Machining Zone\, Knox Makers - 116 Childress St SW\, Knoxville\, TN URL:https://events.knoxmakers.org/event/machining-100-intro-to-machining-38 END:VEVENT BEGIN:VEVENT UID:event-7880-session-0@haxdb DTSTAMP:20260614T163024Z DTSTART:20260411T213000Z DTEND:20260411T123000Z SUMMARY:Woodworking 202 - Hands-on Woodturning DESCRIPTION:You MUST have completed Woodworking 102 - Woodturning Authorization prior to taking this class. \nThis class is a continuation of basic woodturning skills\, focusing mainly on hands-on use of our tools and wood lathes.  We will start the class by going over some of our basic cuts\, then move to the hands on portion.  Students will sharpen tools\, discuss differences between tools\, and practice convex\, concave\, and straight cuts on a spindle.  This class is designed to be flexible\, depending on the experience level\, questions\, and curiosity of the participants\, to help build hands-on woodturning skills and confidence. \n \nClass members are encouraged to bring eye protection (full face shields are ideal. Do not wear any long\, loose-fitting clothing\, long sleeve shirts\, bracelets\, rings or low hanging neck chains. A hat would be appropriate if you don’t want to be picking woods chips out of your hair. \n \nThere is a minimum of 1 and a maximum of 3 attendees. If the minimum is not met 24 hours before class starts\, the class will be canceled and ticket purchases refunded. \n \n*** \n \nDirections-  Knox Makers parking and entrance is located around the back of the SPARK building in the fenced in area. \nKnox Makers is a place for the Knoxville area’s engineers\, artists\, hobbyists\, innovators\, educators and entrepreneurs to work and play. We are a technology and art collective dedicated to the promotion of creativity enabled and informed by science. Our lectures\, workshops\, and outreach programs inspire and educate both members and the general public. Our workshop provides members with both the space for large projects and the tools to complete them. We are a non-profit educational organization supported by member dues and staffed by volunteers. LOCATION:Woodworking Zone\, Knox Makers - 116 Childress St SW\, Knoxville\, TN URL:https://events.knoxmakers.org/event/woodworking-202-hands-on-woodturning END:VEVENT BEGIN:VEVENT UID:event-7819-session-0@haxdb DTSTAMP:20260614T163024Z DTSTART:20260412T160000Z DTEND:20260412T210000Z SUMMARY:KILLSWITCH April 2026 Builder's Challenge DESCRIPTION:Spectators are welcome but this will be a builder centric event!! There will be no announcing or hazards and Thunderdome will be set up in a minimal configuration.\n*** Only builders/participants need to RSVP. Please do not RSVP if you are a spectator. ***\n\n\nDid you fight in the Fall '25 Market Battle and crave MORE?!? Or perhaps you didn’t participate but saw how much fun it was and wished you were in Thunderdome with us??? Either way\, now's your chance!!! \n\nLet's have a smaller\, more informal match in April. This will be a pick-up style contest where we run a double elimination bracket\, referee ourselves\, have no active arena hazards\, and generally have a more relaxed pace. We’ll start at 12 noon and run until we’re done which will vary depending on entries. \n\n \; LOCATION:Knox Makers - 116 Childress St SW\, Knoxville\, TN URL:https://events.knoxmakers.org/event/killswitch-april-2026-builder-s-challenge END:VEVENT BEGIN:VEVENT UID:event-7920-session-0@haxdb DTSTAMP:20260614T163024Z DTSTART:20260414T223000Z DTEND:20260415T013000Z SUMMARY:Show and Share – Public Welcome DESCRIPTION:Open hack nights are a chance for people to come out to Knox Makers and hack on anything at any skill level. You can come out to practice a new programming language\, get help working on your personal projects\, or try your hand at using the 3d printer. You might just come out to see what other folks are working on and lend a hand. If you know anyone who has been curious to come out to Knox Makers\, please invite them along! \nLike all other Tuesday nights\, this event is free and open to the public. Our night will begin with a Show and Share where attendees are encouraged to bring out the projects they have been working on. This is a great time to request feedback for the future direction of your project\, or you can just bring out something you want to show off. We hope to see you there! \n \n**Directions-  Knox Makers parking and entrance is located around the back of the SPARK building in the fenced in area.** \n \nKnox Makers is a place for the Knoxville area’s engineers\, artists\, hobbyists\, innovators\, educators and entrepreneurs to work and play. We are a technology and art collective dedicated to the promotion of creativity enabled and informed by science. Our lectures\, workshops\, and outreach programs inspire and educate both members and the general public. Our workshop provides members with both the space for large projects and the tools to complete them. We are a non-profit educational organization supported by member dues and staffed by volunteers. LOCATION:Classroom\, Knox Makers - 116 Childress St SW\, Knoxville\, TN URL:https://events.knoxmakers.org/event/show-and-share-public-welcome-4 END:VEVENT BEGIN:VEVENT UID:event-7873-session-0@haxdb DTSTAMP:20260614T163024Z DTSTART:20260414T233000Z DTEND:20260415T003000Z SUMMARY:Make Food from Dirt DESCRIPTION:Learn from Knox Makers how easy and interesting it can be to make food from dirt! Come sow dwarf tomato and lettuce seeds and learn the basics of sowing seeds indoors\, from plant scientists who are also Knox Makers. There will be a short talk\, followed by questions and a social event where we get our hands muddy and sow seeds and eat cookies. LOCATION:Classroom\, Knox Makers - 116 Childress St SW\, Knoxville\, TN URL:https://events.knoxmakers.org/event/make-food-from-dirt END:VEVENT BEGIN:VEVENT UID:event-7881-session-0@haxdb DTSTAMP:20260614T163024Z DTSTART:20260415T223000Z DTEND:20260416T013000Z SUMMARY:Woodworking 302 - Pen Turning DESCRIPTION:You MUST have completed Woodworking 102 - Woodturning Basics prior to taking this class. \nThis class is a continuation of basic woodturning skills beyond spindles and it will include a brief safety reminder. \n \nLearn how to make a ball-point pen using wood or plastic resin barrel blanks. This class will cover how to prepare the materials for the pen’s barrel\, discuss and demonstrate additional materials and accessories\, and the final assembly and finishing methods commonly used. Pen kits and additional materials will be provided and participants will leave with a completed pen. \n \nClass members are encouraged to bring eye protection (full face shields are ideal. Do not wear any long\, loose-fitting clothing\, long sleeve shirts\, bracelets\, rings or low hanging neck chains. A hat would be appropriate if you don’t want to be picking woods chips out of your hair. \n \nThere is a minimum of 1 and a maximum of 3 attendees. If the minimum is not met 24 hours before class starts\, the class will be canceled and ticket purchases refunded. \n \n*** \n \nDirections-  Knox Makers parking and entrance is located around the back of the SPARK building in the fenced in area. \nKnox Makers is a place for the Knoxville area’s engineers\, artists\, hobbyists\, innovators\, educators and entrepreneurs to work and play. We are a technology and art collective dedicated to the promotion of creativity enabled and informed by science. Our lectures\, workshops\, and outreach programs inspire and educate both members and the general public. Our workshop provides members with both the space for large projects and the tools to complete them. We are a non-profit educational organization supported by member dues and staffed by volunteers. LOCATION:Woodworking Zone\, Knox Makers - 116 Childress St SW\, Knoxville\, TN URL:https://events.knoxmakers.org/event/woodworking-302-pen-turning-7 END:VEVENT BEGIN:VEVENT UID:event-7929-session-0@haxdb DTSTAMP:20260614T163024Z DTSTART:20260416T223000Z DTEND:20260417T013000Z SUMMARY:Intro to Metalworking (MIG 101) DESCRIPTION:This is the basic authorization class for using the Metalworking Shop and the MIG Welder. We will cover lots of safety and learn the metal shop tools\, then we’ll move to hands-on setup and shared MIG welding time.  This class can run later than predicted depending on student's needs. \nProper attire is natural fiber clothing such as cotton jeans and T-shirts. Close toed shoes or boots and long pants are mandatory. NO spandex or “tech” style clothes made from nylon/polyester nor are shorts/skirts allowed. Students may bring their own PPE (Personal Protective Equipment\,) welding shield and gloves if they wish - but these are NOT required as we have setups for everyone to use. LOCATION:Metalworking Zone\, Knox Makers - 116 Childress St SW\, Knoxville\, TN URL:https://events.knoxmakers.org/event/intro-to-metalworking-mig-101-36 END:VEVENT BEGIN:VEVENT UID:event-7909-session-0@haxdb DTSTAMP:20260614T163024Z DTSTART:20260417T223000Z DTEND:20260418T013000Z SUMMARY:Learn to Sew DESCRIPTION:This class covers the basics of using a sewing machine. A discussion on which additional tools are needed to be a successful sewer\, how to use some of the most basic stitches\, and how to maintain and troubleshoot your machine. Attendees will learn how to change needles and presser feet\, wind their bobbins\, thread their machine and bobbin and experience the outcome of adjustments to length and width. Everyone leaves with a drawstring bag.\n\nAttendees are encouraged to bring their own\, personal machines to this class. No machine? No problem. We have one you can use. All other materials for this class will be provided and are included in the fee.\n\nThere is a maximum of 4 participants. Class time may run longer depending on the number of students and abilities coming into the class.\n\n**Directions-  Knox Makers parking and entrance is located around the back of the SPARK building in the fenced in area. Use Brady Street on map apps.** LOCATION:Fiber Arts Zone\, Knox Makers - 116 Childress St SW\, Knoxville\, TN URL:https://events.knoxmakers.org/event/learn-to-sew-21 END:VEVENT BEGIN:VEVENT UID:event-7930-session-0@haxdb DTSTAMP:20260614T163024Z DTSTART:20260417T223000Z DTEND:20260418T020000Z SUMMARY:Wood CNC 101 - NibblerBOT Authorization DESCRIPTION:This class is designed to equip participants with the skills and knowledge needed to safely and effectively operate the NibblerBot CNC router using LinuxCNC with the Probe Basic GUI. The focus is on machine operation—not CAD/CAM design or toolpath generation. Participants will engage in a classroom lecture with simulator demonstration\, followed by a hands-on session in the workshop. \n \n
\nTopics include navigating the GUI\, startup and shutdown procedures\, loading programs via the cncfm web interface and the NibblerBOT FreeCAD post-processor\, loading and unloading tooling\, performing tool and workpiece touch-offs\, basic workholding methods\, and an introduction to conversational programming. \n \n
\nThe cost is $19.96 for Knox Makers members. There will be a maximum of 5 spots of this class\, and a minimum of 2 tickets must be sold. If the class minimum is not met 48 hours prior to class start time\, the class we be canceled and all tickets will be refunded. \n \n**Directions- Knox Makers parking and entrance is located around the back of the SPARK building in the fenced in area.** \n \nKnox Makers is a place for the Knoxville area’s engineers\, artists\, hobbyists\, innovators\, educators and entrepreneurs to work and play. We are a technology and art collective dedicated to the promotion of creativity enabled and informed by science. Our lectures\, workshops\, and outreach programs inspire and educate both members and the general public. Our workshop provides members with both the space for large projects and the tools to complete them. We are a non-profit educational organization supported by member dues and staffed by volunteers. LOCATION:Classroom\, Knox Makers - 116 Childress St SW\, Knoxville\, TN URL:https://events.knoxmakers.org/event/wood-cnc-101-nibblerbot-authorization-8 END:VEVENT BEGIN:VEVENT UID:event-7932-session-0@haxdb DTSTAMP:20260614T163024Z DTSTART:20260418T130000Z DTEND:20260418T170000Z SUMMARY:Metal Turning 101 – MSC Lathe Tool Authorization DESCRIPTION:\\*\\* Intro to Machining is a prerequisite class. You have to complete the Intro to Machining class before you can take the Metal Turning 101 Class. \\*\\* \n \nThis is a hands on class and is subject to run over the allotted 4 hours. Please make sure your schedule is free accordingly. \n \n
\nIn this class you will receive basic hands on experience in operating a MSC 13" x 40" Lathe. During this 4 to 5 hour class\, David will go over the basics which include work holding\, facing\, center drilling\, drilling\, profile turning\, grooving and parting operations. You will also learn the basics of using a dial indicator for more accurate parts\, power feed\, and basic care of the lathe. This is a tool authorization class and once completed you will be authorized to use the lathe and Knox Maker members will receive a key need to operate the lathe. Intro to Machining is a prerequisite class. \n \n(Not covered in the class: Threading\, Boring Knurling\, Spherical generation\, or tapered turning between centers) \n \nThere will be a fee of $24.96 for members.. There will be a maximum of 4 spots of this class\, and a minimum of 1 tickets must be sold. If the class minimum is not met 48 hours prior to class start time\, the class we be canceled and all tickets will be refunded. \n \nDirections- Knox Makers parking and entrance is located around the back of the SPARK building in the fenced in area. \n \nKnox Makers is a place for the Knoxville area’s engineers\, artists\, hobbyists\, innovators\, educators and entrepreneurs to work and play. We are a technology and art collective dedicated to the promotion of creativity enabled and informed by science. Our lectures\, workshops\, and outreach programs inspire and educate both members and the general public. Our workshop provides members with both the space for large projects and the tools to complete them. We are a non-profit educational organization supported by member dues and staffed by volunteers. LOCATION:Machining Zone\, Knox Makers - 116 Childress St SW\, Knoxville\, TN URL:https://events.knoxmakers.org/event/metal-turning-101-msc-lathe-tool-authorization-14 END:VEVENT BEGIN:VEVENT UID:event-7936-session-0@haxdb DTSTAMP:20260614T163024Z DTSTART:20260418T140000Z DTEND:20260418T160000Z SUMMARY:Moonraker 101 DESCRIPTION:This is an introduction class to our CO2 laser cutter\, Moonraker. Tracy will lead attendees of this class as they learn the basics of laser cutting\, make a simple design\, and then engrave and cut out the design using the laser cutter in our space. This class is intended for members who have not yet been authorized to use Moonraker or need/want a review of its operation.Laptops will be provided for this class. \nHelp installing the software on your own laptop can be provided outside of class.In class we will be using Inkscape and the laser cutting extension bundle we’ve put together for it on the member laptops. \nYou can find Inkscape at: https://inkscape.org/ \nYou can find the KM-Laser bundle at: https://github.com/KnoxMakers/KM-Laser LOCATION:Classroom\, Knox Makers - 116 Childress St SW\, Knoxville\, TN URL:https://events.knoxmakers.org/event/moonraker-101-25 END:VEVENT BEGIN:VEVENT UID:event-7763-session-0@haxdb DTSTAMP:20260614T163024Z DTSTART:20260418T170000Z DTEND:20260418T200000Z SUMMARY:Stitch n Bitch DESCRIPTION:If you are fiber-curious\, come see what others are working on. We have members who sew clothing and costumes\, knit\, crochet\, weave\, quilt\, embroider\, and many other bitch-and-stitch arts.\n\nOur monthly meeting is meant to be a time to relax and indulge in any or all fiber arts hobbies. Whether you’re an expert or a novice come hang out for all or any part of the fiber fun.\n\nBring a friend if you want. RSVP is not required\, just show up when you can and stay however long you can.\n\nDirections-  Knox Makers parking and entrance is located around the back of the SPARK building in the fenced in area.\n\nKnox Makers is a place for the Knoxville area’s engineers\, artists\, hobbyists\, innovators\, educators and entrepreneurs to work and play. We are a technology and art collective dedicated to the promotion of creativity enabled and informed by science. Our lectures\, workshops\, and outreach programs inspire and educate both members and the general public. Our workshop provides members with both the space for large projects and the tools to complete them. We are a non-profit educational organization supported by member dues and staffed by volunteers. LOCATION:Fiber Arts Zone\, Knox Makers - 116 Childress St SW\, Knoxville\, TN URL:https://events.knoxmakers.org/event/stitch-n-bitch-39 END:VEVENT BEGIN:VEVENT UID:event-7937-session-0@haxdb DTSTAMP:20260614T163024Z DTSTART:20260419T160000Z DTEND:20260419T190000Z SUMMARY:Woodworking 101 - Woodworking Zone Authorization DESCRIPTION:This class will cover topics related to safe and correct operation of equipment within the woodworking area\, as well as some shop etiquette guidelines. This is the authorization class for the area and is required prior to using the equipment. Safe practices will be demonstrated and learned by a hands on approach in the context of taking rough lumber through the process of milling and operation of all equipment in the space. If you have previously paid and attended a wood authorization class then we encourage you to audit the class free of charge at any time.\n\nThe cost is $24.96 for Knox Makers members\, $39.96 for General Public. There will be a maximum of 6 spots of this class\, and a minimum of 3 tickets must be sold. If the class minimum is not met 48 hours prior to class start time\, the class we be canceled and all tickets will be refunded.\n\nDirections- Knox Makers parking and entrance is located around the back of the SPARK building in the fenced in area.\n\nKnox Makers is a place for the Knoxville area’s engineers\, artists\, hobbyists\, innovators\, educators and entrepreneurs to work and play. We are a technology and art collective dedicated to the promotion of creativity enabled and informed by science. Our lectures\, workshops\, and outreach programs inspire and educate both members and the general public. Our workshop provides members with both the space for large projects and the tools to complete them. We are a non-profit educational organization supported by member dues and staffed by volunteers. LOCATION:Woodworking Zone\, Knox Makers - 116 Childress St SW\, Knoxville\, TN URL:https://events.knoxmakers.org/event/woodworking-101-woodworking-zone-authorization END:VEVENT BEGIN:VEVENT UID:event-7941-session-0@haxdb DTSTAMP:20260614T163024Z DTSTART:20260421T220000Z DTEND:20260421T230000Z SUMMARY:Cookout DESCRIPTION:Come join us for our monthly cookout. Burgers and dogs are always on the menu. We also offer vegan burger options. Bring a side or just yourself. Come hang out and meet other makers. Get a tour\, stay for our Show n Share program\, craft or talk. All are welcome. LOCATION:Knox Makers - 116 Childress St SW\, Knoxville\, TN URL:https://events.knoxmakers.org/event/cookout END:VEVENT BEGIN:VEVENT UID:event-7921-session-0@haxdb DTSTAMP:20260614T163024Z DTSTART:20260421T223000Z DTEND:20260422T013000Z SUMMARY:Show and Share – Public Welcome DESCRIPTION:Open hack nights are a chance for people to come out to Knox Makers and hack on anything at any skill level. You can come out to practice a new programming language\, get help working on your personal projects\, or try your hand at using the 3d printer. You might just come out to see what other folks are working on and lend a hand. If you know anyone who has been curious to come out to Knox Makers\, please invite them along! \nLike all other Tuesday nights\, this event is free and open to the public. Our night will begin with a Show and Share where attendees are encouraged to bring out the projects they have been working on. This is a great time to request feedback for the future direction of your project\, or you can just bring out something you want to show off. We hope to see you there! \n \n**Directions-  Knox Makers parking and entrance is located around the back of the SPARK building in the fenced in area.** \n \nKnox Makers is a place for the Knoxville area’s engineers\, artists\, hobbyists\, innovators\, educators and entrepreneurs to work and play. We are a technology and art collective dedicated to the promotion of creativity enabled and informed by science. Our lectures\, workshops\, and outreach programs inspire and educate both members and the general public. Our workshop provides members with both the space for large projects and the tools to complete them. We are a non-profit educational organization supported by member dues and staffed by volunteers. LOCATION:Classroom\, Knox Makers - 116 Childress St SW\, Knoxville\, TN URL:https://events.knoxmakers.org/event/show-and-share-public-welcome-5 END:VEVENT BEGIN:VEVENT UID:event-7931-session-0@haxdb DTSTAMP:20260614T163024Z DTSTART:20260421T233000Z DTEND:20260422T003000Z SUMMARY:Beaded Keychain DESCRIPTION:Join us to create these simple macrame keychains. Made with eco-friendly hemp cord and beginner friendly knots. These are so easy and fun to create. There will be an assortment of bead colors and styles to choose from so you can make it your own creation. LOCATION:Classroom\, Knox Makers - 116 Childress St SW\, Knoxville\, TN URL:https://events.knoxmakers.org/event/beaded-keychain END:VEVENT BEGIN:VEVENT UID:event-7904-session-0@haxdb DTSTAMP:20260614T163024Z DTSTART:20260422T223000Z DTEND:20260423T013000Z SUMMARY:Woodworking 102 - Woodturning Authorization DESCRIPTION:This is the basic authorization class for using the wood lathes in the wood working zone. In this class Randy will spend the majority of the class covering the basics of how to operate our wood lathes safely\, how to sharpen lathe tools\, and a demonstration turning a spindle\, going over what was taught. Some examples of spindles include table and chair legs\, baseball bats\, and candle sticks. You will be shown how to prepare and mount the wood on the lathe. There will be a demonstration of how to use and sharpen the tools that are appropriate for turning spindles.\n\nClass members are encouraged to bring eye protection (full face shields are ideal. Do not wear any long\, loose-fitting clothing\, long sleeve shirts\, bracelets\, rings or low hanging neck chains. A hat would be appropriate if you don’t want to be picking woods chips out of your hair.\n\nThere is a minimum of 1 and a maximum of 6 attendees. If the minimum is not met 24 hours before class starts\, the class will be canceled and ticket purchases refunded.\n\n***\n\nDirections-  Knox Makers parking and entrance is located around the back of the SPARK building in the fenced in area.\nKnox Makers is a place for the Knoxville area’s engineers\, artists\, hobbyists\, innovators\, educators and entrepreneurs to work and play. We are a technology and art collective dedicated to the promotion of creativity enabled and informed by science. Our lectures\, workshops\, and outreach programs inspire and educate both members and the general public. Our workshop provides members with both the space for large projects and the tools to complete them. We are a non-profit educational organization supported by member dues and staffed by volunteers. LOCATION:Woodworking Zone\, Knox Makers - 116 Childress St SW\, Knoxville\, TN URL:https://events.knoxmakers.org/event/woodworking-102-woodturning-authorization-2 END:VEVENT BEGIN:VEVENT UID:event-7940-session-0@haxdb DTSTAMP:20260614T163024Z DTSTART:20260423T160000Z DTEND:20260423T190000Z SUMMARY:Woodworking 101 - Woodworking Zone Authorization DESCRIPTION:This class will cover topics related to safe and correct operation of equipment within the woodworking area\, as well as some shop etiquette guidelines. This is the authorization class for the area and is required prior to using the equipment. Safe practices will be demonstrated and learned by a hands on approach in the context of taking rough lumber through the process of milling and operation of all equipment in the space. If you have previously paid and attended a wood authorization class then we encourage you to audit the class free of charge at any time.\n\nThe cost is $24.96 for Knox Makers members\, $39.96 for General Public. There will be a maximum of 6 spots of this class\, and a minimum of 3 tickets must be sold. If the class minimum is not met 48 hours prior to class start time\, the class we be canceled and all tickets will be refunded.\n\nDirections- Knox Makers parking and entrance is located around the back of the SPARK building in the fenced in area.\n\nKnox Makers is a place for the Knoxville area’s engineers\, artists\, hobbyists\, innovators\, educators and entrepreneurs to work and play. We are a technology and art collective dedicated to the promotion of creativity enabled and informed by science. Our lectures\, workshops\, and outreach programs inspire and educate both members and the general public. Our workshop provides members with both the space for large projects and the tools to complete them. We are a non-profit educational organization supported by member dues and staffed by volunteers. LOCATION:Woodworking Zone\, Knox Makers - 116 Childress St SW\, Knoxville\, TN URL:https://events.knoxmakers.org/event/woodworking-101-woodworking-zone-authorization-2 END:VEVENT BEGIN:VEVENT UID:event-7882-session-0@haxdb DTSTAMP:20260614T163024Z DTSTART:20260423T230000Z DTEND:20260424T010000Z SUMMARY:As the Lathe Turns DESCRIPTION:Anything and everything about woodturning is possible at As The Lathe Turns. Discussions and demonstrations\, Tools and tips. Hacks and help. Thinking about buying a lathe but you don't know which one? What's the best tool for hollowing a bowl or box? Not sure about that special piece of wood\, how to cut it and mount it on the lathe? Woodturners (and wannabe woodturners) talking with other woodturners about woodturning. \n \nThis is a free hang out session dedicated to all things wood turning. Come happy and possibly leave with rounded things. \n \nThis month's theme\, make something that is fun\, on purpose!  We will also be discussing segmented turning. \n \n*** \n \nDirections-  Knox Makers parking and entrance is located around the back of the SPARK building in the fenced in area. \nKnox Makers is a place for the Knoxville area’s engineers\, artists\, hobbyists\, innovators\, educators and entrepreneurs to work and play. We are a technology and art collective dedicated to the promotion of creativity enabled and informed by science. Our lectures\, workshops\, and outreach programs inspire and educate both members and the general public. Our workshop provides members with both the space for large projects and the tools to complete them. We are a non-profit educational organization supported by member dues and staffed by volunteers. LOCATION:Woodworking Zone\, Knox Makers - 116 Childress St SW\, Knoxville\, TN URL:https://events.knoxmakers.org/event/as-the-lathe-turns-20 END:VEVENT BEGIN:VEVENT UID:event-7933-session-0@haxdb DTSTAMP:20260614T163024Z DTSTART:20260424T223000Z DTEND:20260425T003000Z SUMMARY:CAM Jam! DESCRIPTION:Don’t let the name fool you\, while the end goal is more folks who can whip up their own CAM jobs this meetup targets ALL aspects of FreeCAD! Want to level up your 3D printing game and design your own stuff\, even multi-color? Have a cabinet or furniture build that you’d really like to nail down before putting saw to wood? Proficient in Fusion 360 or another CAD program and want to make the leap to our preferred FOSS solution? Have that elusive NibblerBOT 101 under your belt and not sure where to go from there? For all those and more let’s get together and figure it out!\n\nThis meetup will evolve but at the very least we’ll share tips\, tricks\, and other resources among ourselves. We’ll help each other over humps in our own working designs that we’re stuck on. Our resident FreeCAD maintainer Billy can give us the scoop on the latest changes in the pipeline for FreeCAD. Occasionally we could do a CAD-a-long with a pre-selected project to walk folks through a simple design from start to finish. Those are just some opening ideas\, share your own in the FreeCAD or CNC channels!\n\nWhether you’re brand spanking new and need help installing FreeCAD or perhaps a bit seasoned and have some knowledge nuggets to share with the rest of us **ALL skill levels are welcome**! And while not necessary\, having a laptop with FreeCAD loaded would be helpful (there are a limited number of shop laptops with FreeCAD installed). Check out the [FreeCAD wiki](https://wiki.knoxmakers.org/FreeCAD) for details on the current version we’re using as well as other details. LOCATION:Classroom\, Knox Makers - 116 Childress St SW\, Knoxville\, TN URL:https://events.knoxmakers.org/event/cam-jam-2 END:VEVENT BEGIN:VEVENT UID:event-7935-session-0@haxdb DTSTAMP:20260614T163024Z DTSTART:20260425T140000Z DTEND:20260425T170000Z SUMMARY:Byzantine Chainmail for Beginners DESCRIPTION:This introductory class will cover chainmail basics\, including terminology and supplies\, how to source your own materials\, and where to find chainmail patterns for future projects. Participants will learn how to construct a Byzantine weave and leave with their very own chainmail bracelet. LOCATION:Arts & Crafts Zone\, Knox Makers - 116 Childress St SW\, Knoxville\, TN URL:https://events.knoxmakers.org/event/byzantine-chainmail-for-beginners-3 END:VEVENT BEGIN:VEVENT UID:event-7927-session-0@haxdb DTSTAMP:20260614T163024Z DTSTART:20260425T170000Z DTEND:20260425T200000Z SUMMARY:Heat Press Auth (Includes Sublimation Printer) DESCRIPTION:Sublimation printing is soft on fabric like silk screening and not stiff like HTV (heat transfer vinyl.) Come learn how to print your favorite image on special paper then use the heat press to transfer it to a shirt\, hat\, mug\, tumbler or plate. We will also demonstrate how to incorporate white. While this class is focused on sublimation\, the heat press is not limited to only sublimation prints. You can press HTV designs cut out on the Silhouette or vinyl cutter. Watch for the next Sticker Class to learn that skill.\n\nThere will be a short talks on how to and not to press each item integrated with hands on time. Every student will press their name onto the auth shirt and leave with a coffee cup or tumbler printed with a design of their choice.\n\n**Pre-requisites:** Create an image of your name for the shirt and up to a 4" x 9.5" image for your mug or 7.75" tall x 8.75" wide image for your tumbler. Please mail your images to simone.blanchat@gmail.com or sim1blanket in MM prior to class.\n\nThere will be a maximum of 8 spots of this class\, and a minimum of 4 tickets must be sold. If the class minimum is not met 48 hours prior to class start time\, the class we be canceled and all tickets will be refunded. LOCATION:Fiber Arts Zone\, Knox Makers - 116 Childress St SW\, Knoxville\, TN URL:https://events.knoxmakers.org/event/heat-press-auth-includes-sublimation-printer-14 END:VEVENT BEGIN:VEVENT UID:event-7939-session-0@haxdb DTSTAMP:20260614T163024Z DTSTART:20260426T140000Z DTEND:20260426T180000Z SUMMARY:Wood CNC 101 - NibblerBOT Authorization DESCRIPTION:This class is designed to equip participants with the skills and knowledge needed to safely and effectively operate the NibblerBot CNC router using LinuxCNC with the Probe Basic GUI. The focus is on machine operation—not CAD/CAM design or toolpath generation. Participants will engage in a classroom lecture with simulator demonstration\, followed by a hands-on session in the workshop. \n \nTopics include navigating the GUI\, startup and shutdown procedures\, loading programs via the cncfm web interface and the NibblerBOT FreeCAD post-processor\, loading and unloading tooling\, performing tool and workpiece touch-offs\, basic workholding methods\, and an introduction to conversational programming. \n \nThe cost is $19.96 for Knox Makers members. There will be a maximum of 5 spots of this class\, and a minimum of 2 tickets must be sold. If the class minimum is not met 48 hours prior to class start time\, the class we be canceled and all tickets will be refunded. \n \n**Directions- Knox Makers parking and entrance is located around the back of the SPARK building in the fenced in area.** \n \nKnox Makers is a place for the Knoxville area’s engineers\, artists\, hobbyists\, innovators\, educators and entrepreneurs to work and play. We are a technology and art collective dedicated to the promotion of creativity enabled and informed by science. Our lectures\, workshops\, and outreach programs inspire and educate both members and the general public. Our workshop provides members with both the space for large projects and the tools to complete them. We are a non-profit educational organization supported by member dues and staffed by volunteers. LOCATION:Classroom\, Knox Makers - 116 Childress St SW\, Knoxville\, TN URL:https://events.knoxmakers.org/event/wood-cnc-101-nibblerbot-authorization-9 END:VEVENT BEGIN:VEVENT UID:event-7938-session-0@haxdb DTSTAMP:20260614T163024Z DTSTART:20260426T140000Z DTEND:20260426T170000Z SUMMARY:Blacksmithing Authorization – Intro to Forging DESCRIPTION:This class introduces you to the new blacksmithing zone. We cover propane forge operation\, zone safety\, basic hand forging\, and nail making. At the completion of the class\, members will receive a key code to access the forge and foundry building. \n \nProper attire is natural fiber clothing such as cotton jeans and T-shirts. Cotton/polyester blend is OK but synthetic clothing or other materials that can melt are unsafe. We have eye protection available but suggest you bring your own if you have them. \n \nThis class is for members only and costs $11.96. There will be a 5 person maximum and a 2 person minimum. If the minimum isn’t met 24 hours in advance the class will be canceled. \n \nDirections: Knox Makers parking and entrance is located in the fenced area around the back of the SPARK building. \n \nKnox Makers is a place for the Knoxville area’s engineers\, artists\, hobbyists\, innovators\, educators and entrepreneurs to work and play. We are a technology and art collective dedicated to the promotion of creativity enabled and informed by science. Our lectures\, workshops\, and outreach programs inspire and educate both members and the general public. Our workshop provides members with both the space for large projects and the tools to complete them. We are a non-profit educational organization supported by member dues and staffed by volunteers. LOCATION:Blacksmithing Zone\, Knox Makers - 116 Childress St SW\, Knoxville\, TN URL:https://events.knoxmakers.org/event/blacksmithing-authorization-intro-to-forging-57 END:VEVENT BEGIN:VEVENT UID:event-7922-session-0@haxdb DTSTAMP:20260614T163024Z DTSTART:20260428T223000Z DTEND:20260429T013000Z SUMMARY:Show and Share – Public Welcome DESCRIPTION:Open hack nights are a chance for people to come out to Knox Makers and hack on anything at any skill level. You can come out to practice a new programming language\, get help working on your personal projects\, or try your hand at using the 3d printer. You might just come out to see what other folks are working on and lend a hand. If you know anyone who has been curious to come out to Knox Makers\, please invite them along! \nLike all other Tuesday nights\, this event is free and open to the public. Our night will begin with a Show and Share where attendees are encouraged to bring out the projects they have been working on. This is a great time to request feedback for the future direction of your project\, or you can just bring out something you want to show off. We hope to see you there! \n \n**Directions-  Knox Makers parking and entrance is located around the back of the SPARK building in the fenced in area.** \n \nKnox Makers is a place for the Knoxville area’s engineers\, artists\, hobbyists\, innovators\, educators and entrepreneurs to work and play. We are a technology and art collective dedicated to the promotion of creativity enabled and informed by science. Our lectures\, workshops\, and outreach programs inspire and educate both members and the general public. Our workshop provides members with both the space for large projects and the tools to complete them. We are a non-profit educational organization supported by member dues and staffed by volunteers. LOCATION:Classroom\, Knox Makers - 116 Childress St SW\, Knoxville\, TN URL:https://events.knoxmakers.org/event/show-and-share-public-welcome-6 END:VEVENT BEGIN:VEVENT UID:event-7948-session-0@haxdb DTSTAMP:20260614T163024Z DTSTART:20260428T234500Z DTEND:20260429T003000Z SUMMARY:Mattermost and my.knoxmakers DESCRIPTION:Mattermost driving you crazy? What is my.knoxmakers? SSO\, huh? \nJoin us Tuesday after Show 'n Share to get the scoop and get answers to your questions about how we communicate with each other. LOCATION:Classroom\, Knox Makers - 116 Childress St SW\, Knoxville\, TN URL:https://events.knoxmakers.org/event/mattermost-and-my-knoxmakers END:VEVENT BEGIN:VEVENT UID:event-7887-session-0@haxdb DTSTAMP:20260614T163024Z DTSTART:20260430T230000Z DTEND:20260430T130000Z SUMMARY:New Member Onboarding DESCRIPTION:Whether you’re a current member\, trial member\, or prospective member\, you’re welcome to join us at this month’s New Member Onboarding! \nWe’ll start with a brief overview of Knox Makers’ origins and purpose and talk about how the organization works. You’ll learn a bit about the resources available to members and about the path to membership. Afterwards\, we’ll hang out and socialize. \nThe focus is on new members\, but longer-term members are encouraged to come and meet new folks. LOCATION:Classroom\, Knox Makers - 116 Childress St SW\, Knoxville\, TN URL:https://events.knoxmakers.org/event/new-member-onboarding-12 END:VEVENT BEGIN:VEVENT UID:event-7840-session-0@haxdb DTSTAMP:20260614T163024Z DTSTART:20260502T170000Z DTEND:20260502T200000Z SUMMARY:Quilty Pleasures DESCRIPTION:Join us for an afternoon devoted to quilting! Bring your current project—whether you’re chain piecing\, working on HSTs\, squaring up blocks\, or diving into English or foundation paper piecing. Maybe you’re hand quilting or finishing up a binding—whatever you’re working on\, bring it along! \n \nWe’re all about learning\, sharing\, and enjoying some creative time together. It doesn't matter if you're just starting your quilting journey or have been enjoying the craft for decades\, all are welcome for a casual afternoon of fun\, shared stories and stitches. \n \n
\n
\nBring a friend if you want. RSVP is not required\, just show up when you can and stay however long you can. \n \nDirections-  Knox Makers parking and entrance is located around the back of the SPARK building in the fenced in area. Use Brady Street in map apps \n \nKnox Makers is a place for the Knoxville area’s engineers\, artists\, hobbyists\, innovators\, educators and entrepreneurs to work and play. We are a technology and art collective dedicated to the promotion of creativity enabled and informed by science. Our lectures\, workshops\, and outreach programs inspire and educate both members and the general public. Our workshop provides members with both the space for large projects and the tools to complete them. We are a non-profit educational organization supported by member dues and staffed by volunteers. LOCATION:Classroom\, Knox Makers - 116 Childress St SW\, Knoxville\, TN URL:https://events.knoxmakers.org/event/quilty-pleasures-4 END:VEVENT BEGIN:VEVENT UID:event-7910-session-0@haxdb DTSTAMP:20260614T163024Z DTSTART:20260503T170000Z DTEND:20260503T203000Z SUMMARY:Quiltinator (Long-Arm) Auth DESCRIPTION:Quiltinator is our long arm quilting machine. It features a 20” throat and stitch regulation. Also available is an attachable table for ruler work.\n\nWe start by covering what to consider before you even bring your quilt using and defining long-arm quilting terminology. Next up is machine preparation and loading practices. Lastly it will be your turn to write your name and practice designs within a square. LOCATION:Fiber Arts Zone\, Knox Makers - 116 Childress St SW\, Knoxville\, TN URL:https://events.knoxmakers.org/event/quiltinator-long-arm-auth-6 END:VEVENT BEGIN:VEVENT UID:event-7923-session-0@haxdb DTSTAMP:20260614T163024Z DTSTART:20260505T223000Z DTEND:20260506T013000Z SUMMARY:Show and Share – Public Welcome DESCRIPTION:Open hack nights are a chance for people to come out to Knox Makers and hack on anything at any skill level. You can come out to practice a new programming language\, get help working on your personal projects\, or try your hand at using the 3d printer. You might just come out to see what other folks are working on and lend a hand. If you know anyone who has been curious to come out to Knox Makers\, please invite them along! \nLike all other Tuesday nights\, this event is free and open to the public. Our night will begin with a Show and Share where attendees are encouraged to bring out the projects they have been working on. This is a great time to request feedback for the future direction of your project\, or you can just bring out something you want to show off. We hope to see you there! \n \n**Directions-  Knox Makers parking and entrance is located around the back of the SPARK building in the fenced in area.** \n \nKnox Makers is a place for the Knoxville area’s engineers\, artists\, hobbyists\, innovators\, educators and entrepreneurs to work and play. We are a technology and art collective dedicated to the promotion of creativity enabled and informed by science. Our lectures\, workshops\, and outreach programs inspire and educate both members and the general public. Our workshop provides members with both the space for large projects and the tools to complete them. We are a non-profit educational organization supported by member dues and staffed by volunteers. LOCATION:Classroom\, Knox Makers - 116 Childress St SW\, Knoxville\, TN URL:https://events.knoxmakers.org/event/show-and-share-public-welcome-7 END:VEVENT BEGIN:VEVENT UID:event-7928-session-0@haxdb DTSTAMP:20260614T163024Z DTSTART:20260505T233000Z DTEND:20260506T003000Z SUMMARY:Artistic Maps DESCRIPTION:Tracy will discuss how to find map datasets and what formats work for different types of maps\, and how you can make your own artistic maps using freely licensed software. LOCATION:Classroom\, Knox Makers - 116 Childress St SW\, Knoxville\, TN URL:https://events.knoxmakers.org/event/aartisticmaps END:VEVENT BEGIN:VEVENT UID:event-7945-session-0@haxdb DTSTAMP:20260614T163024Z DTSTART:20260506T223000Z DTEND:20260507T013000Z SUMMARY:Woodworking 102 - Woodturning Authorization DESCRIPTION:This is the basic authorization class for using the wood lathes in the wood working zone. In this class Randy will spend the majority of the class covering the basics of how to operate our wood lathes safely\, how to sharpen lathe tools\, and a demonstration turning a spindle\, going over what was taught. Some examples of spindles include table and chair legs\, baseball bats\, and candle sticks. You will be shown how to prepare and mount the wood on the lathe. There will be a demonstration of how to use and sharpen the tools that are appropriate for turning spindles.\n\nPlease note\, that there will be little to no hands-on-woodturning in this class\, as it is the authorization and demonstration to use the KM wood lathes.\n\nThere is a minimum of 1 and a maximum of 6 attendees. If the minimum is not met 24 hours before class starts\, the class will be canceled and ticket purchases refunded.\n\n***\n\nDirections-  Knox Makers parking and entrance is located around the back of the SPARK building in the fenced in area.\nKnox Makers is a place for the Knoxville area’s engineers\, artists\, hobbyists\, innovators\, educators and entrepreneurs to work and play. We are a technology and art collective dedicated to the promotion of creativity enabled and informed by science. Our lectures\, workshops\, and outreach programs inspire and educate both members and the general public. Our workshop provides members with both the space for large projects and the tools to complete them. We are a non-profit educational organization supported by member dues and staffed by volunteers. LOCATION:Woodworking Zone\, Knox Makers - 116 Childress St SW\, Knoxville\, TN URL:https://events.knoxmakers.org/event/woodworking-102-woodturning-authorization-3 END:VEVENT BEGIN:VEVENT UID:event-7952-session-0@haxdb DTSTAMP:20260614T163024Z DTSTART:20260507T223000Z DTEND:20260508T023000Z SUMMARY:Wood CNC 101 - NibblerBOT Authorization DESCRIPTION:This class is designed to equip participants with the skills and knowledge needed to safely and effectively operate the NibblerBot CNC router using LinuxCNC with the Probe Basic GUI. The focus is on machine operation—not CAD/CAM design or toolpath generation. Participants will engage in a classroom lecture with simulator demonstration\, followed by a hands-on session in the workshop. \n \nTopics include navigating the GUI\, startup and shutdown procedures\, loading programs via the cncfm web interface and the NibblerBOT FreeCAD post-processor\, loading and unloading tooling\, performing tool and workpiece touch-offs\, basic workholding methods\, and an introduction to conversational programming. \n \nThe cost is $19.96 for Knox Makers members. There will be a maximum of 5 spots of this class\, and a minimum of 2 tickets must be sold. If the class minimum is not met 48 hours prior to class start time\, the class we be canceled and all tickets will be refunded. \n \n**Directions- Knox Makers parking and entrance is located around the back of the SPARK building in the fenced in area.** \n \nKnox Makers is a place for the Knoxville area’s engineers\, artists\, hobbyists\, innovators\, educators and entrepreneurs to work and play. We are a technology and art collective dedicated to the promotion of creativity enabled and informed by science. Our lectures\, workshops\, and outreach programs inspire and educate both members and the general public. Our workshop provides members with both the space for large projects and the tools to complete them. We are a non-profit educational organization supported by member dues and staffed by volunteers. LOCATION:Classroom\, Knox Makers - 116 Childress St SW\, Knoxville\, TN URL:https://events.knoxmakers.org/event/wood-cnc-101-nibblerbot-authorization-10 END:VEVENT BEGIN:VEVENT UID:event-7953-session-0@haxdb DTSTAMP:20260614T163024Z DTSTART:20260509T140000Z DTEND:20260509T170000Z SUMMARY:Woodworking 101 - Woodworking Zone Authorization DESCRIPTION:This class will cover topics related to safe and correct operation of equipment within the woodworking area\, as well as some shop etiquette guidelines. This is the authorization class for the area and is required prior to using the equipment. Safe practices will be demonstrated and learned by a hands on approach in the context of taking rough lumber through the process of milling and operation of all equipment in the space. If you have previously paid and attended a wood authorization class then we encourage you to audit the class free of charge at any time.\n\nThe cost is $24.96 for Knox Makers members\, $39.96 for General Public. There will be a maximum of 6 spots of this class\, and a minimum of 3 tickets must be sold. If the class minimum is not met 48 hours prior to class start time\, the class we be canceled and all tickets will be refunded.\n\nDirections- Knox Makers parking and entrance is located around the back of the SPARK building in the fenced in area.\n\nKnox Makers is a place for the Knoxville area’s engineers\, artists\, hobbyists\, innovators\, educators and entrepreneurs to work and play. We are a technology and art collective dedicated to the promotion of creativity enabled and informed by science. Our lectures\, workshops\, and outreach programs inspire and educate both members and the general public. Our workshop provides members with both the space for large projects and the tools to complete them. We are a non-profit educational organization supported by member dues and staffed by volunteers. LOCATION:Woodworking Zone\, Knox Makers - 116 Childress St SW\, Knoxville\, TN URL:https://events.knoxmakers.org/event/woodworking-101-woodworking-zone-authorization-3 END:VEVENT BEGIN:VEVENT UID:event-7924-session-0@haxdb DTSTAMP:20260614T163024Z DTSTART:20260512T223000Z DTEND:20260513T013000Z SUMMARY:Show and Share – Public Welcome DESCRIPTION:Open hack nights are a chance for people to come out to Knox Makers and hack on anything at any skill level. You can come out to practice a new programming language\, get help working on your personal projects\, or try your hand at using the 3d printer. You might just come out to see what other folks are working on and lend a hand. If you know anyone who has been curious to come out to Knox Makers\, please invite them along! \nLike all other Tuesday nights\, this event is free and open to the public. Our night will begin with a Show and Share where attendees are encouraged to bring out the projects they have been working on. This is a great time to request feedback for the future direction of your project\, or you can just bring out something you want to show off. We hope to see you there! \n \n**Directions-  Knox Makers parking and entrance is located around the back of the SPARK building in the fenced in area.** \n \nKnox Makers is a place for the Knoxville area’s engineers\, artists\, hobbyists\, innovators\, educators and entrepreneurs to work and play. We are a technology and art collective dedicated to the promotion of creativity enabled and informed by science. Our lectures\, workshops\, and outreach programs inspire and educate both members and the general public. Our workshop provides members with both the space for large projects and the tools to complete them. We are a non-profit educational organization supported by member dues and staffed by volunteers. LOCATION:Classroom\, Knox Makers - 116 Childress St SW\, Knoxville\, TN URL:https://events.knoxmakers.org/event/show-and-share-public-welcome-8 END:VEVENT BEGIN:VEVENT UID:event-7949-session-0@haxdb DTSTAMP:20260614T163024Z DTSTART:20260512T233000Z DTEND:20260512T133000Z SUMMARY:New Member Onboarding DESCRIPTION:Whether you’re a current member\, trial member\, or prospective member\, you’re welcome to join us at this month’s New Member Onboarding!\nWe’ll start with a brief overview of Knox Makers’ origins and purpose and talk about how the organization works. You’ll learn a bit about the resources available to members and about the path to membership. Afterwards\, we’ll hang out and socialize.\nThe focus is on new members\, but longer-term members are encouraged to come and meet new folks. LOCATION:Classroom\, Knox Makers - 116 Childress St SW\, Knoxville\, TN URL:https://events.knoxmakers.org/event/new-member-onboarding-13 END:VEVENT BEGIN:VEVENT UID:event-7946-session-0@haxdb DTSTAMP:20260614T163024Z DTSTART:20260513T223000Z DTEND:20260514T013000Z SUMMARY:Woodworking 202 - Hands-on Woodturning DESCRIPTION:You MUST have completed Woodworking 102 - Woodturning Authorization prior to taking this class.\nThis class is a continuation of basic woodturning skills\, focusing mainly on hands-on use of our tools and wood lathes.  We will start the class by going over some of our basic cuts\, then move to the hands on portion.  Students will sharpen tools\, discuss differences between tools\, and practice convex\, concave\, and straight cuts on a spindle.  This class is designed to be flexible\, depending on the experience level\, questions\, and curiosity of the participants\, to help build hands-on woodturning skills and confidence.\n\nClass members are encouraged to bring eye protection (full face shields are ideal. Do not wear any long\, loose-fitting clothing\, long sleeve shirts\, bracelets\, rings or low hanging neck chains. A hat would be appropriate if you don’t want to be picking woods chips out of your hair.\n\nThere is a minimum of 1 and a maximum of 3 attendees. If the minimum is not met 24 hours before class starts\, the class will be canceled and ticket purchases refunded.\n\n***\n\nDirections-  Knox Makers parking and entrance is located around the back of the SPARK building in the fenced in area.\nKnox Makers is a place for the Knoxville area’s engineers\, artists\, hobbyists\, innovators\, educators and entrepreneurs to work and play. We are a technology and art collective dedicated to the promotion of creativity enabled and informed by science. Our lectures\, workshops\, and outreach programs inspire and educate both members and the general public. Our workshop provides members with both the space for large projects and the tools to complete them. We are a non-profit educational organization supported by member dues and staffed by volunteers. LOCATION:Woodworking Zone\, Knox Makers - 116 Childress St SW\, Knoxville\, TN URL:https://events.knoxmakers.org/event/woodworking-202-hands-on-woodturning-2 END:VEVENT BEGIN:VEVENT UID:event-7958-session-0@haxdb DTSTAMP:20260614T163024Z DTSTART:20260515T230000Z DTEND:20260516T020000Z SUMMARY:Poster Jam DESCRIPTION:Come to the positively phenominal Knox Makers Poster Jam! We'll be hanging out in Arts & Crafts from 7 p.m. on making bespoke posters for the KM Maker Market in the fall. Guidelines are here - https://talk.knoxmakers.org/knoxmakers/pl/37g31fda7ifsdx439ck7811b7c We'll have a few more over the course of the summer! Hope to see you there! URL:https://events.knoxmakers.org/event/poster-jam END:VEVENT BEGIN:VEVENT UID:event-7954-session-0@haxdb DTSTAMP:20260614T163024Z DTSTART:20260516T140000Z DTEND:20260516T170000Z SUMMARY:Woodworking 103 - Bandsaw authorization DESCRIPTION:Learn how to use the three bandsaws in the woodworking zone safely and effectively. Operation will include: how to avoid damaging the bandsaw blade\, when it requires replacement and how to do that\; how to adjust the blade guard and guides. Which materials can be cut and the appropriate type/size blade to use and those which must never be cut on these bandsaws. There will be discussions and demonstrations regarding how to re-saw thick wood into thinner boards and how to safely cut round and odd-shaped pieces of wood. Participants will have the opportunity for hands-on experience bandsawing a piece of wood. Dust masks are recommended.\n\nThe cost is $24.96 for Knox Makers members\, $39.96 for General Public. There will be a maximum of 8 spots of this class\, and a minimum of 2 tickets must be sold. If the class minimum is not met 24 hours prior to class start time\, the class we be canceled and all tickets will be refunded.\n\nDirections- Knox Makers parking and entrance is located around the back of the SPARK building in the fenced in area.\n\nKnox Makers is a place for the Knoxville area’s engineers\, artists\, hobbyists\, innovators\, educators and entrepreneurs to work and play. We are a technology and art collective dedicated to the promotion of creativity enabled and informed by science. Our lectures\, workshops\, and outreach programs inspire and educate both members and the general public. Our workshop provides members with both the space for large projects and the tools to complete them. We are a non-profit educational organization supported by member dues and staffed by volunteers. LOCATION:Woodworking Zone\, Knox Makers - 116 Childress St SW\, Knoxville\, TN URL:https://events.knoxmakers.org/event/woodworking-103-bandsaw-authorization-18 END:VEVENT BEGIN:VEVENT UID:event-7764-session-0@haxdb DTSTAMP:20260614T163024Z DTSTART:20260516T170000Z DTEND:20260516T200000Z SUMMARY:Stitch n Bitch DESCRIPTION:If you are fiber-curious\, come see what others are working on. We have members who sew clothing and costumes\, knit\, crochet\, weave\, quilt\, embroider\, and many other bitch-and-stitch arts.\n\nOur monthly meeting is meant to be a time to relax and indulge in any or all fiber arts hobbies. Whether you’re an expert or a novice come hang out for all or any part of the fiber fun.\n\nBring a friend if you want. RSVP is not required\, just show up when you can and stay however long you can.\n\nDirections-  Knox Makers parking and entrance is located around the back of the SPARK building in the fenced in area.\n\nKnox Makers is a place for the Knoxville area’s engineers\, artists\, hobbyists\, innovators\, educators and entrepreneurs to work and play. We are a technology and art collective dedicated to the promotion of creativity enabled and informed by science. Our lectures\, workshops\, and outreach programs inspire and educate both members and the general public. Our workshop provides members with both the space for large projects and the tools to complete them. We are a non-profit educational organization supported by member dues and staffed by volunteers. LOCATION:Fiber Arts Zone\, Knox Makers - 116 Childress St SW\, Knoxville\, TN URL:https://events.knoxmakers.org/event/stitch-n-bitch-40 END:VEVENT BEGIN:VEVENT UID:event-7944-session-0@haxdb DTSTAMP:20260614T163024Z DTSTART:20260517T200000Z DTEND:20260517T210000Z SUMMARY:Board Meeting DESCRIPTION:Each board member reports on what they have been done\, what they are working on and future projects. It's a great way to find out what's going on in the organization. LOCATION:Virtual URL:https://events.knoxmakers.org/event/board-meeting-2 END:VEVENT BEGIN:VEVENT UID:event-7942-session-0@haxdb DTSTAMP:20260614T163024Z DTSTART:20260519T220000Z DTEND:20260519T230000Z SUMMARY:Cookout DESCRIPTION:Come join us for our monthly cookout. Burgers and dogs are always on the menu. We also offer vegan burger options. Bring a side or just yourself. Come hang out and meet other makers. Get a tour\, stay for our Show n Share program\, craft or talk. All are welcome. LOCATION:Knox Makers - 116 Childress St SW\, Knoxville\, TN URL:https://events.knoxmakers.org/event/cookout-2 END:VEVENT BEGIN:VEVENT UID:event-7925-session-0@haxdb DTSTAMP:20260614T163024Z DTSTART:20260519T223000Z DTEND:20260520T013000Z SUMMARY:Show and Share – Public Welcome DESCRIPTION:Open hack nights are a chance for people to come out to Knox Makers and hack on anything at any skill level. You can come out to practice a new programming language\, get help working on your personal projects\, or try your hand at using the 3d printer. You might just come out to see what other folks are working on and lend a hand. If you know anyone who has been curious to come out to Knox Makers\, please invite them along! \nLike all other Tuesday nights\, this event is free and open to the public. Our night will begin with a Show and Share where attendees are encouraged to bring out the projects they have been working on. This is a great time to request feedback for the future direction of your project\, or you can just bring out something you want to show off. We hope to see you there! \n \n**Directions-  Knox Makers parking and entrance is located around the back of the SPARK building in the fenced in area.** \n \nKnox Makers is a place for the Knoxville area’s engineers\, artists\, hobbyists\, innovators\, educators and entrepreneurs to work and play. We are a technology and art collective dedicated to the promotion of creativity enabled and informed by science. Our lectures\, workshops\, and outreach programs inspire and educate both members and the general public. Our workshop provides members with both the space for large projects and the tools to complete them. We are a non-profit educational organization supported by member dues and staffed by volunteers. LOCATION:Classroom\, Knox Makers - 116 Childress St SW\, Knoxville\, TN URL:https://events.knoxmakers.org/event/show-and-share-public-welcome-9 END:VEVENT BEGIN:VEVENT UID:event-7958-session-1@haxdb DTSTAMP:20260614T163024Z DTSTART:20260519T234500Z DTEND:20260520T014500Z SUMMARY:Poster Jam DESCRIPTION:Come to the positively phenominal Knox Makers Poster Jam! We'll be hanging out in Arts & Crafts from 7 p.m. on making bespoke posters for the KM Maker Market in the fall. Guidelines are here - https://talk.knoxmakers.org/knoxmakers/pl/37g31fda7ifsdx439ck7811b7c We'll have a few more over the course of the summer! Hope to see you there! URL:https://events.knoxmakers.org/event/poster-jam END:VEVENT BEGIN:VEVENT UID:event-7947-session-0@haxdb DTSTAMP:20260614T163024Z DTSTART:20260520T223000Z DTEND:20260521T013000Z SUMMARY:Woodworking 302 - Pen Turning DESCRIPTION:You MUST have completed Woodworking 102 - Woodturning Basics prior to taking this class.\nThis class is a continuation of basic woodturning skills beyond spindles and it will include a brief safety reminder.\n\nLearn how to make a ball-point pen using wood or plastic resin barrel blanks. This class will cover how to prepare the materials for the pen’s barrel\, discuss and demonstrate additional materials and accessories\, and the final assembly and finishing methods commonly used. Pen kits and additional materials will be provided and participants will leave with a completed pen.\n\nClass members are encouraged to bring eye protection (full face shields are ideal. Do not wear any long\, loose-fitting clothing\, long sleeve shirts\, bracelets\, rings or low hanging neck chains. A hat would be appropriate if you don’t want to be picking woods chips out of your hair.\n\nThere is a minimum of 1 and a maximum of 3 attendees. If the minimum is not met 24 hours before class starts\, the class will be canceled and ticket purchases refunded.\n\n***\n\nDirections-  Knox Makers parking and entrance is located around the back of the SPARK building in the fenced in area.\nKnox Makers is a place for the Knoxville area’s engineers\, artists\, hobbyists\, innovators\, educators and entrepreneurs to work and play. We are a technology and art collective dedicated to the promotion of creativity enabled and informed by science. Our lectures\, workshops\, and outreach programs inspire and educate both members and the general public. Our workshop provides members with both the space for large projects and the tools to complete them. We are a non-profit educational organization supported by member dues and staffed by volunteers. LOCATION:Woodworking Zone\, Knox Makers - 116 Childress St SW\, Knoxville\, TN URL:https://events.knoxmakers.org/event/woodworking-302-pen-turning-8 END:VEVENT BEGIN:VEVENT UID:event-7960-session-0@haxdb DTSTAMP:20260614T163024Z DTSTART:20260521T230000Z DTEND:20260522T010000Z SUMMARY:As the Lathe Turns DESCRIPTION:Anything and everything about woodturning is possible at As The Lathe Turns. Discussions and demonstrations\, Tools and tips. Hacks and help. Thinking about buying a lathe but you don't know which one? What's the best tool for hollowing a bowl or box? Not sure about that special piece of wood\, how to cut it and mount it on the lathe? Woodturners (and wannabe woodturners) talking with other woodturners about woodturning.\n\nThis is a free hang out session dedicated to all things wood turning. Come happy and possibly leave with rounded things.\n\nThis month's theme\, is to turn something that started with one or more voids or holes in it. Anything from bug holes to wood that has been stabilized with resin (Or not!). As well\, Randy will be doing a demo on how to make a bud vase!\n\n***\n\nDirections-  Knox Makers parking and entrance is located around the back of the SPARK building in the fenced in area.\nKnox Makers is a place for the Knoxville area’s engineers\, artists\, hobbyists\, innovators\, educators and entrepreneurs to work and play. We are a technology and art collective dedicated to the promotion of creativity enabled and informed by science. Our lectures\, workshops\, and outreach programs inspire and educate both members and the general public. Our workshop provides members with both the space for large projects and the tools to complete them. We are a non-profit educational organization supported by member dues and staffed by volunteers. LOCATION:Woodworking Zone\, Knox Makers - 116 Childress St SW\, Knoxville\, TN URL:https://events.knoxmakers.org/event/as-the-lathe-turns-21 END:VEVENT BEGIN:VEVENT UID:event-7950-session-0@haxdb DTSTAMP:20260614T163024Z DTSTART:20260521T230000Z DTEND:20260521T130000Z SUMMARY:New Member Onboarding DESCRIPTION:Whether you’re a current member\, trial member\, or prospective member\, you’re welcome to join us at this month’s New Member Onboarding!\nWe’ll start with a brief overview of Knox Makers’ origins and purpose and talk about how the organization works. You’ll learn a bit about the resources available to members and about the path to membership. Afterwards\, we’ll hang out and socialize.\nThe focus is on new members\, but longer-term members are encouraged to come and meet new folks. LOCATION:Classroom\, Knox Makers - 116 Childress St SW\, Knoxville\, TN URL:https://events.knoxmakers.org/event/new-member-onboarding-14 END:VEVENT BEGIN:VEVENT UID:event-7957-session-0@haxdb DTSTAMP:20260614T163024Z DTSTART:20260522T223000Z DTEND:20260523T003000Z SUMMARY:CAM Jam! DESCRIPTION:Don’t let the name fool you\, while the end goal is more folks who can whip up their own CAM jobs this meetup targets ALL aspects of FreeCAD! Want to level up your 3D printing game and design your own stuff\, even multi-color? Have a cabinet or furniture build that you’d really like to nail down before putting saw to wood? Proficient in Fusion 360 or another CAD program and want to make the leap to our preferred FOSS solution? Have that elusive NibblerBOT 101 under your belt and not sure where to go from there? For all those and more let’s get together and figure it out!\n\nThis meetup will evolve but at the very least we’ll share tips\, tricks\, and other resources among ourselves. We’ll help each other over humps in our own working designs that we’re stuck on. Our resident FreeCAD maintainer Billy can give us the scoop on the latest changes in the pipeline for FreeCAD. Occasionally we could do a CAD-a-long with a pre-selected project to walk folks through a simple design from start to finish. Those are just some opening ideas\, share your own in the FreeCAD or CNC channels!\n\nWhether you’re brand spanking new and need help installing FreeCAD or perhaps a bit seasoned and have some knowledge nuggets to share with the rest of us **ALL skill levels are welcome**! And while not necessary\, having a laptop with FreeCAD loaded would be helpful (there are a limited number of shop laptops with FreeCAD installed). Check out the [FreeCAD wiki](https://wiki.knoxmakers.org/FreeCAD) for details on the current version we’re using as well as other details. LOCATION:Classroom\, Knox Makers - 116 Childress St SW\, Knoxville\, TN URL:https://events.knoxmakers.org/event/cam-jam-3 END:VEVENT BEGIN:VEVENT UID:event-7967-session-0@haxdb DTSTAMP:20260614T163024Z DTSTART:20260523T140000Z DTEND:20260523T160000Z SUMMARY:Crossbow 101 DESCRIPTION:This is an introduction class to our Fiber laser cutter\, Crossbow. Jondale will lead attendees of this class as they learn the basics of fiber lasers\, make a simple design\, and then engrave it using Crossbow. This class is intended for members who have not yet been authorized to use Crossbow or need/want a review of its operation. Laptops will be provided for this class. \n \nHelp installing the software on your own laptop can be provided outside of class. In class we will be using Meerk40t on the member laptops to design for and run the laser. LOCATION:Classroom\, Knox Makers - 116 Childress St SW\, Knoxville\, TN URL:https://events.knoxmakers.org/event/crossbow-101-25 END:VEVENT BEGIN:VEVENT UID:event-7955-session-0@haxdb DTSTAMP:20260614T163024Z DTSTART:20260523T140000Z DTEND:20260523T170000Z SUMMARY:Woodworking 101 - Woodworking Zone Authorization DESCRIPTION:This class will cover topics related to safe and correct operation of equipment within the woodworking area\, as well as some shop etiquette guidelines. This is the authorization class for the area and is required prior to using the equipment. Safe practices will be demonstrated and learned by a hands on approach in the context of taking rough lumber through the process of milling and operation of all equipment in the space. If you have previously paid and attended a wood authorization class then we encourage you to audit the class free of charge at any time.\n\nThe cost is $24.96 for Knox Makers members\, $39.96 for General Public. There will be a maximum of 6 spots of this class\, and a minimum of 3 tickets must be sold. If the class minimum is not met 48 hours prior to class start time\, the class we be canceled and all tickets will be refunded.\n\nDirections- Knox Makers parking and entrance is located around the back of the SPARK building in the fenced in area.\n\nKnox Makers is a place for the Knoxville area’s engineers\, artists\, hobbyists\, innovators\, educators and entrepreneurs to work and play. We are a technology and art collective dedicated to the promotion of creativity enabled and informed by science. Our lectures\, workshops\, and outreach programs inspire and educate both members and the general public. Our workshop provides members with both the space for large projects and the tools to complete them. We are a non-profit educational organization supported by member dues and staffed by volunteers. LOCATION:Woodworking Zone\, Knox Makers - 116 Childress St SW\, Knoxville\, TN URL:https://events.knoxmakers.org/event/woodworking-101-woodworking-zone-authorization-4 END:VEVENT BEGIN:VEVENT UID:event-7959-session-0@haxdb DTSTAMP:20260614T163024Z DTSTART:20260523T170000Z DTEND:20260523T200000Z SUMMARY:FreeCAD CAM 101 - Intro to CAM DESCRIPTION:This class introduces participants to using FreeCAD’s v1.1.1 CAM workbench to generate toolpaths for CNC machining. The emphasis is on hands-on CAM workflow\, toolpath creation\, simulation\, and preparing G-code ready for CNC use\, not machine operation or NibblerBOT authorization. We’ll start with simple engraving from an imported SVG\, move into inside and outside profile cuts for panel-style projects\, and finish with a 2.5D tray project using prepared class files. \n \nTopics include importing SVGs as geometry and converting them to sketches\, navigating the CAM workbench\, creating CAM jobs\, setting up stock and origins\, selecting toolbits\, and generating common operations like mill facing\, engraving\, profile cuts\, adaptive pocketing\, and roughing/finishing passes. We’ll also cover Lead In/Out and Copy Operation dressups\, checking jobs for common errors\, and post processing. \n \nThe cost is $14.96 for Knox Makers members. There will be a maximum of 5 spots for this class\, and a minimum of 2 tickets must be sold. If the class minimum is not met 48 hours prior to class start time\, the class will be canceled and all tickets will be refunded. \n \n**NOTE:** Laptops will be provided for up to 4 students. If you plan to use your own laptop\, please install the latest version of [FreeCAD CAM+](https://github.com/Connor9220/FreeCAD/releases/latest) before class. Instructions for installing and configuring FreeCAD for the class are available on the [Knox Makers wiki.](https://wiki.knoxmakers.org/FreeCAD) You may also come to a CAM Jam 20–30 minutes early\, and we’ll help you get set up. \n \n**Directions- Knox Makers parking and entrance is located around the back of the SPARK building in the fenced in area.** \n \nKnox Makers is a place for the Knoxville area’s engineers\, artists\, hobbyists\, innovators\, educators and entrepreneurs to work and play. We are a technology and art collective dedicated to the promotion of creativity enabled and informed by science. Our lectures\, workshops\, and outreach programs inspire and educate both members and the general public. Our workshop provides members with both the space for large projects and the tools to complete them. We are a non-profit educational organization supported by member dues and staffed by volunteers. LOCATION:Classroom\, Knox Makers - 116 Childress St SW\, Knoxville\, TN URL:https://events.knoxmakers.org/event/freecad-cam-101-intro-to-cam-2 END:VEVENT BEGIN:VEVENT UID:event-7961-session-0@haxdb DTSTAMP:20260614T163024Z DTSTART:20260523T170000Z DTEND:20260523T200000Z SUMMARY:Small Alterations or Mending with a Machine DESCRIPTION:\n\n Bring two items to class for hands on practice.\n\n***\n\nDirections- Knox Makers parking and entrance is located around the back of the SPARK building in the fenced in area.\n\nKnox Makers is a place for the Knoxville area’s engineers\, artists\, hobbyists\, innovators\, educators and entrepreneurs to work and play. We are a technology and art collective dedicated to the promotion of creativity enabled and informed by science. Our lectures\, workshops\, and outreach programs inspire and educate both members and the general public. Our workshop provides members with both the space for large projects and the tools to complete them. We are a non-profit educational organization supported by member dues and staffed by volunteers. LOCATION:Fiber Arts Zone\, Knox Makers - 116 Childress St SW\, Knoxville\, TN URL:https://events.knoxmakers.org/event/small-alterations-or-mending-with-a-machine-4 END:VEVENT BEGIN:VEVENT UID:event-7926-session-0@haxdb DTSTAMP:20260614T163024Z DTSTART:20260526T223000Z DTEND:20260527T013000Z SUMMARY:Show and Share – Public Welcome DESCRIPTION:Open hack nights are a chance for people to come out to Knox Makers and hack on anything at any skill level. You can come out to practice a new programming language\, get help working on your personal projects\, or try your hand at using the 3d printer. You might just come out to see what other folks are working on and lend a hand. If you know anyone who has been curious to come out to Knox Makers\, please invite them along! \nLike all other Tuesday nights\, this event is free and open to the public. Our night will begin with a Show and Share where attendees are encouraged to bring out the projects they have been working on. This is a great time to request feedback for the future direction of your project\, or you can just bring out something you want to show off. We hope to see you there! \n \n**Directions-  Knox Makers parking and entrance is located around the back of the SPARK building in the fenced in area.** \n \nKnox Makers is a place for the Knoxville area’s engineers\, artists\, hobbyists\, innovators\, educators and entrepreneurs to work and play. We are a technology and art collective dedicated to the promotion of creativity enabled and informed by science. Our lectures\, workshops\, and outreach programs inspire and educate both members and the general public. Our workshop provides members with both the space for large projects and the tools to complete them. We are a non-profit educational organization supported by member dues and staffed by volunteers. LOCATION:Classroom\, Knox Makers - 116 Childress St SW\, Knoxville\, TN URL:https://events.knoxmakers.org/event/show-and-share-public-welcome-10 END:VEVENT BEGIN:VEVENT UID:event-7956-session-0@haxdb DTSTAMP:20260614T163024Z DTSTART:20260527T223000Z DTEND:20260528T013000Z SUMMARY:Woodworking 101 - Woodworking Zone Authorization DESCRIPTION:This class will cover topics related to safe and correct operation of equipment within the woodworking area\, as well as some shop etiquette guidelines. This is the authorization class for the area and is required prior to using the equipment. Safe practices will be demonstrated and learned by a hands on approach in the context of taking rough lumber through the process of milling and operation of all equipment in the space. If you have previously paid and attended a wood authorization class then we encourage you to audit the class free of charge at any time.\n\nThe cost is $24.96 for Knox Makers members\, $39.96 for General Public. There will be a maximum of 6 spots of this class\, and a minimum of 3 tickets must be sold. If the class minimum is not met 48 hours prior to class start time\, the class we be canceled and all tickets will be refunded.\n\nDirections- Knox Makers parking and entrance is located around the back of the SPARK building in the fenced in area.\n\nKnox Makers is a place for the Knoxville area’s engineers\, artists\, hobbyists\, innovators\, educators and entrepreneurs to work and play. We are a technology and art collective dedicated to the promotion of creativity enabled and informed by science. Our lectures\, workshops\, and outreach programs inspire and educate both members and the general public. Our workshop provides members with both the space for large projects and the tools to complete them. We are a non-profit educational organization supported by member dues and staffed by volunteers. LOCATION:Woodworking Zone\, Knox Makers - 116 Childress St SW\, Knoxville\, TN URL:https://events.knoxmakers.org/event/woodworking-101-woodworking-zone-authorization-5 END:VEVENT BEGIN:VEVENT UID:event-7962-session-0@haxdb DTSTAMP:20260614T163024Z DTSTART:20260528T223000Z DTEND:20260529T013000Z SUMMARY:Intro to TIG Welding (GTAW 201) DESCRIPTION:You **MUST** have completed the Introduction to Metalworking (MIG 101) pre-requisite before taking this class. This is not an intro to the metal shop\, but the next step focusing on beginning TIG welding. \nThis is the next class in the welding series granting authorization on the TIG welding machines. \nWe will spend just a few minutes refreshing basic safety and area requirements\, then we will go over the plasma cutter. We’ll also learn how to set up a TIG machine and have shared welding time practicing technique. \nStudents are welcome bring their own PPE\, shield and gloves if they have them\, but this is NOT required- we have setups available to use. LOCATION:Metalworking Zone\, Knox Makers - 116 Childress St SW\, Knoxville\, TN URL:https://events.knoxmakers.org/event/intro-to-tig-welding-gtaw-201-14 END:VEVENT BEGIN:VEVENT UID:event-7964-session-0@haxdb DTSTAMP:20260614T163024Z DTSTART:20260530T140000Z DTEND:20260530T160000Z SUMMARY:Moonraker 101 DESCRIPTION:This is an introduction class to our CO2 laser cutter\, Moonraker. Tracy will lead attendees of this class as they learn the basics of laser cutting\, make a simple design\, and then engrave and cut out the design using the laser cutter in our space. This class is intended for members who have not yet been authorized to use Moonraker or need/want a review of its operation.Laptops will be provided for this class. \nHelp installing the software on your own laptop can be provided outside of class.In class we will be using Inkscape and the laser cutting extension bundle we’ve put together for it on the member laptops. \nYou can find Inkscape at: https://inkscape.org/ \nYou can find the KM-Laser bundle at: https://github.com/KnoxMakers/KM-Laser LOCATION:Classroom\, Knox Makers - 116 Childress St SW\, Knoxville\, TN URL:https://events.knoxmakers.org/event/moonraker-101-26 END:VEVENT BEGIN:VEVENT UID:event-7966-session-0@haxdb DTSTAMP:20260614T163024Z DTSTART:20260530T140000Z DTEND:20260530T170000Z SUMMARY:Blacksmithing Authorization – Intro to Forging DESCRIPTION:This class introduces you to the new blacksmithing zone. We cover propane forge operation\, zone safety\, basic hand forging\, and nail making. At the completion of the class\, members will receive a key code to access the forge and foundry building.\n\nProper attire is natural fiber clothing such as cotton jeans and T-shirts. Cotton/polyester blend is OK but synthetic clothing or other materials that can melt are unsafe. We have eye protection available but suggest you bring your own if you have them.\n\nThis class is for members only and costs $11.96. There will be a 5 person maximum and a 2 person minimum. If the minimum isn’t met 24 hours in advance the class will be canceled.\n\nDirections: Knox Makers parking and entrance is located in the fenced area around the back of the SPARK building.\n\nKnox Makers is a place for the Knoxville area’s engineers\, artists\, hobbyists\, innovators\, educators and entrepreneurs to work and play. We are a technology and art collective dedicated to the promotion of creativity enabled and informed by science. Our lectures\, workshops\, and outreach programs inspire and educate both members and the general public. Our workshop provides members with both the space for large projects and the tools to complete them. We are a non-profit educational organization supported by member dues and staffed by volunteers. LOCATION:Blacksmithing Zone\, Knox Makers - 116 Childress St SW\, Knoxville\, TN URL:https://events.knoxmakers.org/event/blacksmithing-authorization-intro-to-forging-58 END:VEVENT BEGIN:VEVENT UID:event-7963-session-0@haxdb DTSTAMP:20260614T163024Z DTSTART:20260531T150000Z DTEND:20260531T193000Z SUMMARY:Intro to Metalworking (MIG 101) DESCRIPTION:This is the basic authorization class for using the Metalworking Shop and the MIG Welder. We will cover lots of safety and learn the metal shop tools\, then we’ll move to hands-on setup and shared MIG welding time.  This class can run later than predicted depending on student's needs. \n \nProper attire is natural fiber clothing such as cotton jeans and T-shirts. Close toed shoes or boots and long pants are mandatory. NO spandex or “tech” style clothes made from nylon/polyester nor are shorts/skirts allowed. Students may bring their own PPE (Personal Protective Equipment\,) welding shield and gloves if they wish - but these are NOT required as we have setups for everyone to use. LOCATION:Knox Makers - 116 Childress St SW\, Knoxville\, TN URL:https://events.knoxmakers.org/event/intro-to-metalworking-mig-101-37 END:VEVENT BEGIN:VEVENT UID:event-7965-session-0@haxdb DTSTAMP:20260614T163024Z DTSTART:20260531T180000Z DTEND:20260531T220000Z SUMMARY:Wood CNC 101 - NibblerBOT Authorization DESCRIPTION:This class is designed to equip participants with the skills and knowledge needed to safely and effectively operate the NibblerBot CNC router using LinuxCNC with the Probe Basic GUI. The focus is on machine operation—not CAD/CAM design or toolpath generation. Participants will engage in a classroom lecture with simulator demonstration\, followed by a hands-on session in the workshop.\n\nTopics include navigating the GUI\, startup and shutdown procedures\, loading programs via the cncfm web interface and the NibblerBOT FreeCAD post-processor\, loading and unloading tooling\, performing tool and workpiece touch-offs\, basic workholding methods\, and an introduction to conversational programming.\n\nThe cost is $19.96 for Knox Makers members. There will be a maximum of 5 spots of this class\, and a minimum of 2 tickets must be sold. If the class minimum is not met 48 hours prior to class start time\, the class we be canceled and all tickets will be refunded.\n\n**Directions- Knox Makers parking and entrance is located around the back of the SPARK building in the fenced in area.**\n\nKnox Makers is a place for the Knoxville area’s engineers\, artists\, hobbyists\, innovators\, educators and entrepreneurs to work and play. We are a technology and art collective dedicated to the promotion of creativity enabled and informed by science. Our lectures\, workshops\, and outreach programs inspire and educate both members and the general public. Our workshop provides members with both the space for large projects and the tools to complete them. We are a non-profit educational organization supported by member dues and staffed by volunteers. LOCATION:Classroom\, Knox Makers - 116 Childress St SW\, Knoxville\, TN URL:https://events.knoxmakers.org/event/wood-cnc-101-nibblerbot-authorization-11 END:VEVENT BEGIN:VEVENT UID:event-7971-session-0@haxdb DTSTAMP:20260614T163024Z DTSTART:20260605T223000Z DTEND:20260606T013000Z SUMMARY:FreeCAD CAM 101 - Intro to CAM DESCRIPTION:This class introduces participants to using FreeCAD’s v1.1.1 CAM workbench to generate toolpaths for CNC machining. The emphasis is on hands-on CAM workflow\, toolpath creation\, simulation\, and preparing G-code ready for CNC use\, not machine operation or NibblerBOT authorization. We’ll start with simple engraving from an imported SVG\, move into inside and outside profile cuts for panel-style projects\, and finish with a 2.5D tray project using prepared class files. \n \nTopics include importing SVGs as geometry and converting them to sketches\, navigating the CAM workbench\, creating CAM jobs\, setting up stock and origins\, selecting toolbits\, and generating common operations like mill facing\, engraving\, profile cuts\, adaptive pocketing\, and roughing/finishing passes. We’ll also cover Lead In/Out and Copy Operation dressups\, checking jobs for common errors\, and post processing. \n \nThe cost is $14.96 for Knox Makers members. There will be a maximum of 5 spots for this class\, and a minimum of 2 tickets must be sold. If the class minimum is not met 48 hours prior to class start time\, the class will be canceled and all tickets will be refunded. \n \n**NOTE:** Laptops will be provided for up to 4 students. If you plan to use your own laptop\, please install the latest version of [FreeCAD CAM+](https://github.com/Connor9220/FreeCAD/releases/latest) before class. Instructions for installing and configuring FreeCAD for the class are available on the [Knox Makers wiki.](https://wiki.knoxmakers.org/FreeCAD) You may also come to a CAM Jam 20–30 minutes early\, and we’ll help you get set up. \n \n**Directions- Knox Makers parking and entrance is located around the back of the SPARK building in the fenced in area.** \n \nKnox Makers is a place for the Knoxville area’s engineers\, artists\, hobbyists\, innovators\, educators and entrepreneurs to work and play. We are a technology and art collective dedicated to the promotion of creativity enabled and informed by science. Our lectures\, workshops\, and outreach programs inspire and educate both members and the general public. Our workshop provides members with both the space for large projects and the tools to complete them. We are a non-profit educational organization supported by member dues and staffed by volunteers. LOCATION:Classroom\, Knox Makers - 116 Childress St SW\, Knoxville\, TN URL:https://events.knoxmakers.org/event/freecad-cam-101-intro-to-cam-3 END:VEVENT BEGIN:VEVENT UID:event-7841-session-0@haxdb DTSTAMP:20260614T163024Z DTSTART:20260606T170000Z DTEND:20260606T200000Z SUMMARY:Quilty Pleasures DESCRIPTION:Join us for an afternoon devoted to quilting! Bring your current project—whether you’re chain piecing\, working on HSTs\, squaring up blocks\, or diving into English or foundation paper piecing. Maybe you’re hand quilting or finishing up a binding—whatever you’re working on\, bring it along! \n \nWe’re all about learning\, sharing\, and enjoying some creative time together. It doesn't matter if you're just starting your quilting journey or have been enjoying the craft for decades\, all are welcome for a casual afternoon of fun\, shared stories and stitches. \n \n
\n
\nBring a friend if you want. RSVP is not required\, just show up when you can and stay however long you can. \n \nDirections-  Knox Makers parking and entrance is located around the back of the SPARK building in the fenced in area. Use Brady Street in map apps \n \nKnox Makers is a place for the Knoxville area’s engineers\, artists\, hobbyists\, innovators\, educators and entrepreneurs to work and play. We are a technology and art collective dedicated to the promotion of creativity enabled and informed by science. Our lectures\, workshops\, and outreach programs inspire and educate both members and the general public. Our workshop provides members with both the space for large projects and the tools to complete them. We are a non-profit educational organization supported by member dues and staffed by volunteers. LOCATION:Classroom\, Knox Makers - 116 Childress St SW\, Knoxville\, TN URL:https://events.knoxmakers.org/event/quilty-pleasures-5 END:VEVENT BEGIN:VEVENT UID:event-7968-session-0@haxdb DTSTAMP:20260614T163024Z DTSTART:20260607T170000Z DTEND:20260607T210000Z SUMMARY:Metal Turning 101 – MSC Lathe Tool Authorization DESCRIPTION:\\*\\* Intro to Machining is a prerequisite class. You have to complete the Intro to Machining class before you can take the Metal Turning 101 Class. \\*\\*\n\nThis is a hands on class and is subject to run over the allotted 4 hours. Please make sure your schedule is free accordingly.\n\nIn this class you will receive basic hands on experience in operating a MSC 13" x 40" Lathe. During this 4 to 5 hour class\, David will go over the basics which include work holding\, facing\, center drilling\, drilling\, profile turning\, grooving and parting operations. You will also learn the basics of using a dial indicator for more accurate parts\, power feed\, and basic care of the lathe. This is a tool authorization class and once completed you will be authorized to use the lathe and Knox Maker members will receive a key need to operate the lathe. Intro to Machining is a prerequisite class.\n\n(Not covered in the class: Threading\, Boring Knurling\, Spherical generation\, or tapered turning between centers)\n\nThere will be a fee of $24.96 for members.. There will be a maximum of 4 spots of this class\, and a minimum of 1 tickets must be sold. If the class minimum is not met 48 hours prior to class start time\, the class we be canceled and all tickets will be refunded.\n\nDirections- Knox Makers parking and entrance is located around the back of the SPARK building in the fenced in area.\n\nKnox Makers is a place for the Knoxville area’s engineers\, artists\, hobbyists\, innovators\, educators and entrepreneurs to work and play. We are a technology and art collective dedicated to the promotion of creativity enabled and informed by science. Our lectures\, workshops\, and outreach programs inspire and educate both members and the general public. Our workshop provides members with both the space for large projects and the tools to complete them. We are a non-profit educational organization supported by member dues and staffed by volunteers. LOCATION:Machining Zone\, Knox Makers - 116 Childress St SW\, Knoxville\, TN URL:https://events.knoxmakers.org/event/metal-turning-101-msc-lathe-tool-authorization-15 END:VEVENT BEGIN:VEVENT UID:event-7972-session-0@haxdb DTSTAMP:20260614T163024Z DTSTART:20260608T203000Z DTEND:20260608T223000Z SUMMARY:Carve a Simple Wooden Spoon DESCRIPTION:This class is a beginner level class.  We will carve a simple wooden spoon. The spoon is to be functional and not ornamental.  Our spoons will be carved from basswood. Basswood is considered a hardwood\, but is soft\, has very little grain\, and is easy to carve.  This will allow the student to use a gouge and knife with the least amount of energy.  It will increase the opportunity for success.  \nFor this class\, we will use a gouge to hollow out the bowl portion of the spoon and use a knife to shape the outside of the bowl and handle.\n\nDiscussions at the beginning of the class will talk about the different types of carving tools and how to use them. For this class\, we will only use one gouge and a knife\, you will be exposed to different types of carving tools.\n\nDuring our initial discussion\, we will discuss sharpening techniques as well.  For this class\, we will not sharpen any tools\, but you will be introduced to different processes for sharpening.  Sharp tools are a requirement for creating nice looking carvings.  Dull tools will tear wood and make your carving less visually appealing.\n\nWhat you need to bring to the class:\n\nFor this class\, all supplies will be provided.  You do not need to bring materials to the class.\n\n
LOCATION:Woodworking Zone\, Knox Makers - 116 Childress St SW\, Knoxville\, TN URL:https://events.knoxmakers.org/event/carve-a-simple-wooden-spoon-3 END:VEVENT BEGIN:VEVENT UID:event-7973-session-0@haxdb DTSTAMP:20260614T163024Z DTSTART:20260608T223000Z DTEND:20260609T003000Z SUMMARY:Carve a Simple Wooden Spoon DESCRIPTION:This class is a beginner level class.  We will carve a simple wooden spoon. The spoon is to be functional and not ornamental.  Our spoons will be carved from basswood. Basswood is considered a hardwood\, but is soft\, has very little grain\, and is easy to carve.  This will allow the student to use a gouge and knife with the least amount of energy.  It will increase the opportunity for success.  \nFor this class\, we will use a gouge to hollow out the bowl portion of the spoon and use a knife to shape the outside of the bowl and handle.\n\nDiscussions at the beginning of the class will talk about the different types of carving tools and how to use them. For this class\, we will only use one gouge and a knife\, you will be exposed to different types of carving tools.\n\nDuring our initial discussion\, we will discuss sharpening techniques as well.  For this class\, we will not sharpen any tools\, but you will be introduced to different processes for sharpening.  Sharp tools are a requirement for creating nice looking carvings.  Dull tools will tear wood and make your carving less visually appealing.\n\nWhat you need to bring to the class:\n\nFor this class\, all supplies will be provided.  You do not need to bring materials to the class.\n\n
LOCATION:Woodworking Zone\, Knox Makers - 116 Childress St SW\, Knoxville\, TN URL:https://events.knoxmakers.org/event/carve-a-simple-wooden-spoon-4 END:VEVENT BEGIN:VEVENT UID:event-7980-session-0@haxdb DTSTAMP:20260614T163024Z DTSTART:20260609T234500Z DTEND:20260610T004500Z SUMMARY:Gravity Bar DESCRIPTION:Create a cool wooden bar to hang your notes and pictures on the wall! LOCATION:Classroom\, Knox Makers - 116 Childress St SW\, Knoxville\, TN URL:https://events.knoxmakers.org/event/gravity-bar END:VEVENT BEGIN:VEVENT UID:event-7970-session-0@haxdb DTSTAMP:20260614T163024Z DTSTART:20260611T230000Z DTEND:20260611T130000Z SUMMARY:New Member Onboarding DESCRIPTION:Whether you’re a current member\, trial member\, or prospective member\, you’re welcome to join us at this month’s New Member Onboarding!\nWe’ll start with a brief overview of Knox Makers’ origins and purpose and talk about how the organization works. You’ll learn a bit about the resources available to members and about the path to membership. Afterwards\, we’ll hang out and socialize.\nThe focus is on new members\, but longer-term members are encouraged to come and meet new folks. LOCATION:Classroom\, Knox Makers - 116 Childress St SW\, Knoxville\, TN URL:https://events.knoxmakers.org/event/new-member-onboarding-16 END:VEVENT BEGIN:VEVENT UID:event-7983-session-0@haxdb DTSTAMP:20260614T163024Z DTSTART:20260612T140000Z DTEND:20260612T170000Z SUMMARY:Stained Glass 101 DESCRIPTION:Learn to make your own stained glass creations using the copper foil method! This class will cover the process start to finish and get you hands on experience to bring to your projects. We will go over the basics of choosing or making a good pattern\, applying it to your chosen glass\, cutting\, grinding\, foiling\, burnishing\, soldering\, adding mounting points\, cleaning\, and finally finishing a piece. Then you can practice it all on a class pattern with us and hopefully leave having made your very own stained glass suncatcher! No prior experience or preparation is required\, but please wear closed toe shoes and bring something to tie back any long hair with. LOCATION:Arts & Crafts Zone\, Knox Makers - 116 Childress St SW\, Knoxville\, TN URL:https://events.knoxmakers.org/event/stained-glass-101 END:VEVENT BEGIN:VEVENT UID:event-7979-session-0@haxdb DTSTAMP:20260614T163024Z DTSTART:20260613T140000Z DTEND:20260613T160000Z SUMMARY:Moonraker 101 DESCRIPTION:This is an introduction class to our CO2 laser cutter\, Moonraker. Tracy will lead attendees of this class as they learn the basics of laser cutting\, make a simple design\, and then engrave and cut out the design using the laser cutter in our space. This class is intended for members who have not yet been authorized to use Moonraker or need/want a review of its operation.Laptops will be provided for this class.\nHelp installing the software on your own laptop can be provided outside of class.In class we will be using Inkscape and the laser cutting extension bundle we’ve put together for it on the member laptops.\nYou can find Inkscape at: https://inkscape.org/\nYou can find the KM-Laser bundle at: https://github.com/KnoxMakers/KM-Laser LOCATION:Classroom\, Knox Makers - 116 Childress St SW\, Knoxville\, TN URL:https://events.knoxmakers.org/event/moonraker-101-27 END:VEVENT BEGIN:VEVENT UID:event-7943-session-0@haxdb DTSTAMP:20260614T163024Z DTSTART:20260616T220000Z DTEND:20260616T230000Z SUMMARY:Cookout DESCRIPTION:Come join us for our monthly cookout. Burgers and dogs are always on the menu. We also offer vegan burger options. Bring a side or just yourself. Come hang out and meet other makers. Get a tour\, stay for our Show n Share program\, craft or talk. All are welcome. LOCATION:Knox Makers - 116 Childress St SW\, Knoxville\, TN URL:https://events.knoxmakers.org/event/cookout-3 END:VEVENT BEGIN:VEVENT UID:event-7985-session-0@haxdb DTSTAMP:20260614T163024Z DTSTART:20260617T220000Z DTEND:20260618T010000Z SUMMARY:Book Bedazzling DESCRIPTION:Book Bedazzling is a fun\, beginner-friendly class where participants turn ordinary books into sparkling works of art. Using simple design techniques\, students will learn how to create custom decorated book covers with personality and flair! \n \nThis class is great for anyone who loves books\, crafting\, or making one-of-a-kind gifts. No prior experience is needed\, and all skill levels are welcome. Participants are asked to *bring a book of their choice* and they will leave with that same book with a bedazzled book cover\, plus the confidence to keep decorating at home. \n \n-Requirements: bring your chosen book\, doesn't matter if paperback or hardbound but the more color the better! LOCATION:Arts & Crafts Zone\, Knox Makers - 116 Childress St SW\, Knoxville\, TN URL:https://events.knoxmakers.org/event/book-bedazzling END:VEVENT BEGIN:VEVENT UID:event-7991-session-0@haxdb DTSTAMP:20260614T163024Z DTSTART:20260617T223000Z DTEND:20260618T013000Z SUMMARY:Woodworking 103 - Bandsaw authorization DESCRIPTION:Learn how to use the three bandsaws in the woodworking zone safely and effectively. Operation will include: how to avoid damaging the bandsaw blade\, when it requires replacement and how to do that\; how to adjust the blade guard and guides. Which materials can be cut and the appropriate type/size blade to use and those which must never be cut on these bandsaws. There will be discussions and demonstrations regarding how to re-saw thick wood into thinner boards and how to safely cut round and odd-shaped pieces of wood. Participants will have the opportunity for hands-on experience bandsawing a piece of wood. Dust masks are recommended.\n\nThe cost is $24.96 for Knox Makers members\, $39.96 for General Public. There will be a maximum of 8 spots of this class\, and a minimum of 2 tickets must be sold. If the class minimum is not met 24 hours prior to class start time\, the class we be canceled and all tickets will be refunded.\n\nDirections- Knox Makers parking and entrance is located around the back of the SPARK building in the fenced in area.\n\nKnox Makers is a place for the Knoxville area’s engineers\, artists\, hobbyists\, innovators\, educators and entrepreneurs to work and play. We are a technology and art collective dedicated to the promotion of creativity enabled and informed by science. Our lectures\, workshops\, and outreach programs inspire and educate both members and the general public. Our workshop provides members with both the space for large projects and the tools to complete them. We are a non-profit educational organization supported by member dues and staffed by volunteers. LOCATION:Woodworking Zone\, Knox Makers - 116 Childress St SW\, Knoxville\, TN URL:https://events.knoxmakers.org/event/woodworking-103-bandsaw-authorization-19 END:VEVENT BEGIN:VEVENT UID:event-7984-session-0@haxdb DTSTAMP:20260614T163024Z DTSTART:20260618T220000Z DTEND:20260619T010000Z SUMMARY:Stained Glass 101 DESCRIPTION:Learn to make your own stained glass creations using the copper foil method! This class will cover the process start to finish and get you hands on experience to bring to your projects. We will go over the basics of choosing or making a good pattern\, applying it to your chosen glass\, cutting\, grinding\, foiling\, burnishing\, soldering\, adding mounting points\, cleaning\, and finally finishing a piece. Then you can practice it all on a class pattern with us and hopefully leave having made your very own stained glass suncatcher! No prior experience or preparation is required\, but please wear closed toe shoes and bring something to tie back any long hair with. LOCATION:Arts & Crafts Zone\, Knox Makers - 116 Childress St SW\, Knoxville\, TN URL:https://events.knoxmakers.org/event/stained-glass-101-2 END:VEVENT BEGIN:VEVENT UID:event-7982-session-0@haxdb DTSTAMP:20260614T163024Z DTSTART:20260618T223000Z DTEND:20260619T013000Z SUMMARY:Simple Leather Bag DESCRIPTION:Learn how to create a simple leather drawstring bag. In this class your instructor\, Earl\, will lead you through how to select\, cut\, glue\, punch\, and hand sew your very own leather drawstring bag. This class is intended for people new to leather crafting that are interested in learning more about the basics of the craft. All materials are provided.\n\n
\n
\nPlease note\, on the final step\, sewing\, participants will be provided with two options:Machine sew (Faster option and done by the instructor)Saddle stitch (Slower but more durable. There may be classes devoted to developing this skill in the future.)\n\nThere is a minimum of 1 and a maximum of 4 attendees. If the minimum is not met 24 hours before class starts\, the class will be canceled. LOCATION:Fiber Arts Zone\, Knox Makers - 116 Childress St SW\, Knoxville\, TN URL:https://events.knoxmakers.org/event/simple-leather-bag-4 END:VEVENT BEGIN:VEVENT UID:event-7990-session-0@haxdb DTSTAMP:20260614T163024Z DTSTART:20260618T230000Z DTEND:20260619T010000Z SUMMARY:As the Lathe Turns DESCRIPTION:Anything and everything about woodturning is possible at As The Lathe Turns. Discussions and demonstrations\, Tools and tips. Hacks and help. Thinking about buying a lathe but you don't know which one? What's the best tool for hollowing a bowl or box? Not sure about that special piece of wood\, how to cut it and mount it on the lathe? Woodturners (and wannabe woodturners) talking with other woodturners about woodturning.\n\nThis is a free hang out session dedicated to all things wood turning. Come happy and possibly leave with rounded things.\n\nThis month's theme\, is to turn a bud vase similar to what we saw demonstrated last month. \n\n***\n\nDirections-  Knox Makers parking and entrance is located around the back of the SPARK building in the fenced in area.\nKnox Makers is a place for the Knoxville area’s engineers\, artists\, hobbyists\, innovators\, educators and entrepreneurs to work and play. We are a technology and art collective dedicated to the promotion of creativity enabled and informed by science. Our lectures\, workshops\, and outreach programs inspire and educate both members and the general public. Our workshop provides members with both the space for large projects and the tools to complete them. We are a non-profit educational organization supported by member dues and staffed by volunteers. LOCATION:Woodworking Zone\, Knox Makers - 116 Childress St SW\, Knoxville\, TN URL:https://events.knoxmakers.org/event/as-the-lathe-turns-22 END:VEVENT BEGIN:VEVENT UID:event-7998-session-0@haxdb DTSTAMP:20260614T163024Z DTSTART:20260619T223000Z DTEND:20260620T013000Z SUMMARY:Embroidery Machine Auth DESCRIPTION:This is the authorization class needed to use the Brother Innov-is NQ1700E Embroidery Machine. The general format of the class covers choosing the right stabilizer and needle for your project\, hooping\, designing and stitching it. A hands-on approach will show the basics of how to turn the preloaded text and images into fabric art.\n\nFor the more advanced\, loading up a pes file format embroidery design of your own will be covered. Class time will vary depending on number of questions and skill level of participants. LOCATION:Fiber Arts Zone\, Knox Makers - 116 Childress St SW\, Knoxville\, TN URL:https://events.knoxmakers.org/event/embroidery-machine-auth-57 END:VEVENT BEGIN:VEVENT UID:event-7988-session-0@haxdb DTSTAMP:20260614T163024Z DTSTART:20260619T223000Z DTEND:20260620T003000Z SUMMARY:CAM Jam! DESCRIPTION:Don’t let the name fool you\, while the end goal is more folks who can whip up their own CAM jobs this meetup targets ALL aspects of FreeCAD! Want to level up your 3D printing game and design your own stuff\, even multi-color? Have a cabinet or furniture build that you’d really like to nail down before putting saw to wood? Proficient in Fusion 360 or another CAD program and want to make the leap to our preferred FOSS solution? Have that elusive NibblerBOT 101 under your belt and not sure where to go from there? For all those and more let’s get together and figure it out!\n\nThis meetup will evolve but at the very least we’ll share tips\, tricks\, and other resources among ourselves. We’ll help each other over humps in our own working designs that we’re stuck on. Our resident FreeCAD maintainer Billy can give us the scoop on the latest changes in the pipeline for FreeCAD. Occasionally we could do a CAD-a-long with a pre-selected project to walk folks through a simple design from start to finish. Those are just some opening ideas\, share your own in the FreeCAD or CNC channels!\n\nWhether you’re brand spanking new and need help installing FreeCAD or perhaps a bit seasoned and have some knowledge nuggets to share with the rest of us **ALL skill levels are welcome**! And while not necessary\, having a laptop with FreeCAD loaded would be helpful (there are a limited number of shop laptops with FreeCAD installed). Check out the [FreeCAD wiki](https://wiki.knoxmakers.org/FreeCAD) for details on the current version we’re using as well as other details. LOCATION:Classroom\, Knox Makers - 116 Childress St SW\, Knoxville\, TN URL:https://events.knoxmakers.org/event/cam-jam-4 END:VEVENT BEGIN:VEVENT UID:event-7987-session-0@haxdb DTSTAMP:20260614T163024Z DTSTART:20260620T130000Z DTEND:20260620T170000Z SUMMARY:Pane and Gain DESCRIPTION:It’s that time again! Join us for Pane and Gain\, open workshop hours for stained glass artists of all levels. Whether you’re a total beginner ready to learn the basics or a seasoned artist continuing your own projects\, this is the perfect space to create\, learn\, and connect. Drop in\, work at your own pace\, and have fun with fellow glass enthusiasts! LOCATION:Arts & Crafts Zone\, Knox Makers - 116 Childress St SW\, Knoxville\, TN URL:https://events.knoxmakers.org/event/pane-and-gain-2 END:VEVENT BEGIN:VEVENT UID:event-7989-session-0@haxdb DTSTAMP:20260614T163024Z DTSTART:20260620T133000Z DTEND:20260620T163000Z SUMMARY:Woodworking 101 - Woodworking Zone Authorization DESCRIPTION:This class will cover topics related to safe and correct operation of equipment within the woodworking area\, as well as some shop etiquette guidelines. This is the authorization class for the area and is required prior to using the equipment. Safe practices will be demonstrated and learned by a hands on approach in the context of taking rough lumber through the process of milling and operation of all equipment in the space. If you have previously paid and attended a wood authorization class then we encourage you to audit the class free of charge at any time.\n\nThe cost is $24.96 for Knox Makers members\, $39.96 for General Public. There will be a maximum of 6 spots of this class\, and a minimum of 3 tickets must be sold. If the class minimum is not met 48 hours prior to class start time\, the class we be canceled and all tickets will be refunded.\n\nDirections- Knox Makers parking and entrance is located around the back of the SPARK building in the fenced in area.\n\nKnox Makers is a place for the Knoxville area’s engineers\, artists\, hobbyists\, innovators\, educators and entrepreneurs to work and play. We are a technology and art collective dedicated to the promotion of creativity enabled and informed by science. Our lectures\, workshops\, and outreach programs inspire and educate both members and the general public. Our workshop provides members with both the space for large projects and the tools to complete them. We are a non-profit educational organization supported by member dues and staffed by volunteers. LOCATION:Woodworking Zone\, Knox Makers - 116 Childress St SW\, Knoxville\, TN URL:https://events.knoxmakers.org/event/woodworking-101-woodworking-zone-authorization-6 END:VEVENT BEGIN:VEVENT UID:event-7977-session-0@haxdb DTSTAMP:20260614T163024Z DTSTART:20260620T140000Z DTEND:20260620T170000Z SUMMARY:Blacksmithing Authorization – Intro to Forging DESCRIPTION:This class introduces you to the new blacksmithing zone. We cover propane forge operation\, zone safety\, basic hand forging\, and nail making. At the completion of the class\, members will receive a key code to access the forge and foundry building.\n\nProper attire is natural fiber clothing such as cotton jeans and T-shirts. Cotton/polyester blend is OK but synthetic clothing or other materials that can melt are unsafe. We have eye protection available but suggest you bring your own if you have them.\n\nThis class is for members only and costs $11.96. There will be a 5 person maximum and a 2 person minimum. If the minimum isn’t met 24 hours in advance the class will be canceled.\n\nDirections: Knox Makers parking and entrance is located in the fenced area around the back of the SPARK building.\n\nKnox Makers is a place for the Knoxville area’s engineers\, artists\, hobbyists\, innovators\, educators and entrepreneurs to work and play. We are a technology and art collective dedicated to the promotion of creativity enabled and informed by science. Our lectures\, workshops\, and outreach programs inspire and educate both members and the general public. Our workshop provides members with both the space for large projects and the tools to complete them. We are a non-profit educational organization supported by member dues and staffed by volunteers. LOCATION:Blacksmithing Zone\, Knox Makers - 116 Childress St SW\, Knoxville\, TN URL:https://events.knoxmakers.org/event/blacksmithing-authorization-intro-to-forging-59 END:VEVENT BEGIN:VEVENT UID:event-7992-session-0@haxdb DTSTAMP:20260614T163024Z DTSTART:20260620T140000Z DTEND:20260620T160000Z SUMMARY:Crossbow 101 DESCRIPTION:This is an introduction class to our Fiber laser cutter\, Crossbow. Jondale will lead attendees of this class as they learn the basics of fiber lasers\, make a simple design\, and then engrave it using Crossbow. This class is intended for members who have not yet been authorized to use Crossbow or need/want a review of its operation. Laptops will be provided for this class. \n \nHelp installing the software on your own laptop can be provided outside of class. In class we will be using Meerk40t on the member laptops to design for and run the laser. LOCATION:Classroom\, Knox Makers - 116 Childress St SW\, Knoxville\, TN URL:https://events.knoxmakers.org/event/crossbow-101-26 END:VEVENT BEGIN:VEVENT UID:event-7765-session-0@haxdb DTSTAMP:20260614T163024Z DTSTART:20260620T170000Z DTEND:20260620T200000Z SUMMARY:Stitch n Bitch DESCRIPTION:If you are fiber-curious\, come see what others are working on. We have members who sew clothing and costumes\, knit\, crochet\, weave\, quilt\, embroider\, and many other bitch-and-stitch arts.\n\nOur monthly meeting is meant to be a time to relax and indulge in any or all fiber arts hobbies. Whether you’re an expert or a novice come hang out for all or any part of the fiber fun.\n\nBring a friend if you want. RSVP is not required\, just show up when you can and stay however long you can.\n\nDirections-  Knox Makers parking and entrance is located around the back of the SPARK building in the fenced in area.\n\nKnox Makers is a place for the Knoxville area’s engineers\, artists\, hobbyists\, innovators\, educators and entrepreneurs to work and play. We are a technology and art collective dedicated to the promotion of creativity enabled and informed by science. Our lectures\, workshops\, and outreach programs inspire and educate both members and the general public. Our workshop provides members with both the space for large projects and the tools to complete them. We are a non-profit educational organization supported by member dues and staffed by volunteers. LOCATION:Fiber Arts Zone\, Knox Makers - 116 Childress St SW\, Knoxville\, TN URL:https://events.knoxmakers.org/event/stitch-n-bitch-41 END:VEVENT BEGIN:VEVENT UID:event-7997-session-0@haxdb DTSTAMP:20260614T163024Z DTSTART:20260622T223000Z DTEND:20260623T013000Z SUMMARY:Embroidery Machine Auth DESCRIPTION:This is the authorization class needed to use the Brother Innov-is NQ1700E Embroidery Machine. The general format of the class covers choosing the right stabilizer and needle for your project\, hooping\, designing and stitching it. A hands-on approach will show the basics of how to turn the preloaded text and images into fabric art.\n\nFor the more advanced\, loading up a pes file format embroidery design of your own will be covered. Class time will vary depending on number of questions and skill level of participants. LOCATION:Fiber Arts Zone\, Knox Makers - 116 Childress St SW\, Knoxville\, TN URL:https://events.knoxmakers.org/event/embroidery-machine-auth-55 END:VEVENT BEGIN:VEVENT UID:event-7969-session-0@haxdb DTSTAMP:20260614T163024Z DTSTART:20260623T233000Z DTEND:20260623T133000Z SUMMARY:New Member Onboarding DESCRIPTION:Whether you’re a current member\, trial member\, or prospective member\, you’re welcome to join us at this month’s New Member Onboarding!\nWe’ll start with a brief overview of Knox Makers’ origins and purpose and talk about how the organization works. You’ll learn a bit about the resources available to members and about the path to membership. Afterwards\, we’ll hang out and socialize.\nThe focus is on new members\, but longer-term members are encouraged to come and meet new folks. LOCATION:Classroom\, Knox Makers - 116 Childress St SW\, Knoxville\, TN URL:https://events.knoxmakers.org/event/new-member-onboarding-15 END:VEVENT BEGIN:VEVENT UID:event-7993-session-0@haxdb DTSTAMP:20260614T163024Z DTSTART:20260624T223000Z DTEND:20260625T013000Z SUMMARY:Intro to TIG Welding (GTAW 201) DESCRIPTION:You **MUST** have completed the Introduction to Metalworking (MIG 101) pre-requisite before taking this class. This is not an intro to the metal shop\, but the next step focusing on beginning TIG welding.\nThis is the next class in the welding series granting authorization on the TIG welding machines.\nWe will spend just a few minutes refreshing basic safety and area requirements\, then we will go over the plasma cutter. We’ll also learn how to set up a TIG machine and have shared welding time practicing technique.\nStudents are welcome bring their own PPE\, shield and gloves if they have them\, but this is NOT required- we have setups available to use. LOCATION:Metalworking Zone\, Knox Makers - 116 Childress St SW\, Knoxville\, TN URL:https://events.knoxmakers.org/event/intro-to-tig-welding-gtaw-201-15 END:VEVENT BEGIN:VEVENT UID:event-7978-session-0@haxdb DTSTAMP:20260614T163024Z DTSTART:20260625T223000Z DTEND:20260626T013000Z SUMMARY:Simple Leather Bag DESCRIPTION:Learn how to create a simple leather drawstring bag. In this class your instructor\, Earl\, will lead you through how to select\, cut\, glue\, punch\, and hand sew your very own leather drawstring bag. This class is intended for people new to leather crafting that are interested in learning more about the basics of the craft. All materials are provided. \n \n
\n
\nPlease note\, on the final step\, sewing\, participants will be provided with two options:Machine sew (Faster option and done by the instructor)Saddle stitch (Slower but more durable. There may be classes devoted to developing this skill in the future.) \n \nThere is a minimum of 1 and a maximum of 4 attendees. If the minimum is not met 24 hours before class starts\, the class will be canceled. LOCATION:Fiber Arts Zone\, Knox Makers - 116 Childress St SW\, Knoxville\, TN URL:https://events.knoxmakers.org/event/simple-leather-bag-5 END:VEVENT BEGIN:VEVENT UID:event-7995-session-0@haxdb DTSTAMP:20260614T163024Z DTSTART:20260627T170000Z DTEND:20260627T200000Z SUMMARY:Fabric Arts - Box making \, Hinged Lid Box DESCRIPTION:In this class\, we will learn how to make a fabric covered 4x4 small hinged lid box. A pre-cut cardboard foundation will be provided. You can choose two complementary fabrics from the selection available in Fiber Arts or supply your own fabrics. You will need to bring two Fat quarters or two ¼ yard cuts of a woven\, no knits (stretchy) fabrics. One fabric will be used for the outside of the box\, the other for the inside.\nAssembly uses both hot glue and needle and thread. Before final assembly you can embelish the box with ribbon or other scrap-booking type of accents so if you have something specific in mind you will need to bring it with you. Hand sewing is part of the final assembly so if needed please bring your own vision aids. i.e. lighted magnfier or glasses.\nAt the end of the class you will have a completed box for a keepsake or Christmas gift.\nThe cost is $14.96 for Knox Makers members\, $24.96 for General Public. There will be a maximum of 6 spots for this class\, and a minimum of 2 tickets must be sold. If the class minimum is not met 48 hours prior to class start time\, the class will be canceled and all tickets will be refunded.\nDirections- Knox Makers parking and entrance is located around the back of the SPARK building in the fenced in area.\n\nKnox Makers is a place for the Knoxville area’s engineers\, artists\, hobbyists\, innovators\, educators and entrepreneurs to work and play. We are a technology and art collective dedicated to the promotion of creativity enabled and informed by science. Our lectures\, workshops\, and outreach programs inspire and educate both members and the general public. Our workshop provides members with both the space for large projects and the tools to complete them. We are a non-profit educational organization supported by member dues and staffed by volunteers. LOCATION:Fiber Arts Zone\, Knox Makers - 116 Childress St SW\, Knoxville\, TN URL:https://events.knoxmakers.org/event/fabric-arts-box-making-hinged-lid-box-2 END:VEVENT BEGIN:VEVENT UID:event-7994-session-0@haxdb DTSTAMP:20260614T163024Z DTSTART:20260628T030000Z DTEND:20260627T193000Z SUMMARY:Intro to Metalworking (MIG 101) DESCRIPTION:This is the basic authorization class for using the Metalworking Shop and the MIG Welder. We will cover lots of safety and learn the metal shop tools\, then we’ll move to hands-on setup and shared MIG welding time.  This class can run later than predicted depending on student's needs.\n\nProper attire is natural fiber clothing such as cotton jeans and T-shirts. Close toed shoes or boots and long pants are mandatory. NO spandex or “tech” style clothes made from nylon/polyester nor are shorts/skirts allowed. Students may bring their own PPE (Personal Protective Equipment\,) welding shield and gloves if they wish - but these are NOT required as we have setups for everyone to use. LOCATION:Metalworking Zone\, Knox Makers - 116 Childress St SW\, Knoxville\, TN URL:https://events.knoxmakers.org/event/intro-to-metalworking-mig-101-38 END:VEVENT BEGIN:VEVENT UID:event-7996-session-0@haxdb DTSTAMP:20260614T163024Z DTSTART:20260628T200000Z DTEND:20260628T210000Z SUMMARY:Board Meeting DESCRIPTION:Each board member reports on what they have been done\, what they are working on and future projects. It's a great way to find out what's going on in the organization. URL:https://events.knoxmakers.org/event/board-meeting-3 END:VEVENT BEGIN:VEVENT UID:event-7981-session-0@haxdb DTSTAMP:20260614T163024Z DTSTART:20260630T234500Z DTEND:20260701T004500Z SUMMARY:Woodspirit Face Carving DESCRIPTION:Come join Bill Cressy as he carves a woodspirit face in cottonwood bark.\nBill will talk through the steps from eye sockets\, noses\, beard\, & hair\, and the appropriate tools to use to get the desired effect. A quick discussion on finishing techniques will also be had at the end.\nThe demonstration will be 30-45 minutes. URL:https://events.knoxmakers.org/event/woodspirit-face-carving END:VEVENT BEGIN:VEVENT UID:event-7842-session-0@haxdb DTSTAMP:20260614T163024Z DTSTART:20260711T170000Z DTEND:20260711T200000Z SUMMARY:Quilty Pleasures DESCRIPTION:Join us for an afternoon devoted to quilting! Bring your current project—whether you’re chain piecing\, working on HSTs\, squaring up blocks\, or diving into English or foundation paper piecing. Maybe you’re hand quilting or finishing up a binding—whatever you’re working on\, bring it along! \n \nWe’re all about learning\, sharing\, and enjoying some creative time together. It doesn't matter if you're just starting your quilting journey or have been enjoying the craft for decades\, all are welcome for a casual afternoon of fun\, shared stories and stitches. \n \n
\n
\nBring a friend if you want. RSVP is not required\, just show up when you can and stay however long you can. \n \nDirections-  Knox Makers parking and entrance is located around the back of the SPARK building in the fenced in area. Use Brady Street in map apps \n \nKnox Makers is a place for the Knoxville area’s engineers\, artists\, hobbyists\, innovators\, educators and entrepreneurs to work and play. We are a technology and art collective dedicated to the promotion of creativity enabled and informed by science. Our lectures\, workshops\, and outreach programs inspire and educate both members and the general public. Our workshop provides members with both the space for large projects and the tools to complete them. We are a non-profit educational organization supported by member dues and staffed by volunteers. LOCATION:Classroom\, Knox Makers - 116 Childress St SW\, Knoxville\, TN URL:https://events.knoxmakers.org/event/quilty-pleasures-6 END:VEVENT BEGIN:VEVENT UID:event-7986-session-0@haxdb DTSTAMP:20260614T163024Z DTSTART:20260711T203000Z DTEND:20260711T233000Z SUMMARY:Painting for Beginners: How to Create Form with Color DESCRIPTION:Learn to paint by seeing the world as shapes\, color\, light\, and shadow rather than outlines and pencil marks. This class focuses on using color relationships to create form\, depth\, and shading\, helping students move beyond drawing-based approaches that center primarily on line work rather than color as the basis for creating form. \n \nWhile we'll be using acrylic paint in class\, the skills you'll learn apply to many painting mediums\, such as oil\, gouache\, and watercolor. We may offer future classes that focus on techniques specific to those mediums. We'll start with simple objects and basic shapes\, learning how to create three-dimensional forms using color and brushwork. As we gain confidence\, we'll move on to more complex subjects and techniques. \n \nThe final classes will be tailored to the interests and goals of the students\, giving everyone the opportunity to practice these concepts on subjects they are personally interested in painting. Whether you're completely new to painting or looking to strengthen your fundamentals\, this class will help you better understand how artists use color to create convincing\, dimensional images. LOCATION:Classroom\, Knox Makers - 116 Childress St SW\, Knoxville\, TN URL:https://events.knoxmakers.org/event/painting-for-beginners-how-to-create-form-with-color END:VEVENT BEGIN:VEVENT UID:event-7766-session-0@haxdb DTSTAMP:20260614T163024Z DTSTART:20260718T170000Z DTEND:20260718T200000Z SUMMARY:Stitch n Bitch DESCRIPTION:If you are fiber-curious\, come see what others are working on. We have members who sew clothing and costumes\, knit\, crochet\, weave\, quilt\, embroider\, and many other bitch-and-stitch arts.\n\nOur monthly meeting is meant to be a time to relax and indulge in any or all fiber arts hobbies. Whether you’re an expert or a novice come hang out for all or any part of the fiber fun.\n\nBring a friend if you want. RSVP is not required\, just show up when you can and stay however long you can.\n\nDirections-  Knox Makers parking and entrance is located around the back of the SPARK building in the fenced in area.\n\nKnox Makers is a place for the Knoxville area’s engineers\, artists\, hobbyists\, innovators\, educators and entrepreneurs to work and play. We are a technology and art collective dedicated to the promotion of creativity enabled and informed by science. Our lectures\, workshops\, and outreach programs inspire and educate both members and the general public. Our workshop provides members with both the space for large projects and the tools to complete them. We are a non-profit educational organization supported by member dues and staffed by volunteers. LOCATION:Fiber Arts Zone\, Knox Makers - 116 Childress St SW\, Knoxville\, TN URL:https://events.knoxmakers.org/event/stitch-n-bitch-42 END:VEVENT BEGIN:VEVENT UID:event-7986-session-1@haxdb DTSTAMP:20260614T163024Z DTSTART:20260718T203000Z DTEND:20260718T233000Z SUMMARY:Painting for Beginners: How to Create Form with Color - Session Two DESCRIPTION:Learn to paint by seeing the world as shapes\, color\, light\, and shadow rather than outlines and pencil marks. This class focuses on using color relationships to create form\, depth\, and shading\, helping students move beyond drawing-based approaches that center primarily on line work rather than color as the basis for creating form. \n \nWhile we'll be using acrylic paint in class\, the skills you'll learn apply to many painting mediums\, such as oil\, gouache\, and watercolor. We may offer future classes that focus on techniques specific to those mediums. We'll start with simple objects and basic shapes\, learning how to create three-dimensional forms using color and brushwork. As we gain confidence\, we'll move on to more complex subjects and techniques. \n \nThe final classes will be tailored to the interests and goals of the students\, giving everyone the opportunity to practice these concepts on subjects they are personally interested in painting. Whether you're completely new to painting or looking to strengthen your fundamentals\, this class will help you better understand how artists use color to create convincing\, dimensional images. LOCATION:Classroom\, Knox Makers - 116 Childress St SW\, Knoxville\, TN URL:https://events.knoxmakers.org/event/painting-for-beginners-how-to-create-form-with-color END:VEVENT BEGIN:VEVENT UID:event-7986-session-2@haxdb DTSTAMP:20260614T163024Z DTSTART:20260725T203000Z DTEND:20260725T233000Z SUMMARY:Painting for Beginners: How to Create Form with Color - Session Three DESCRIPTION:Learn to paint by seeing the world as shapes\, color\, light\, and shadow rather than outlines and pencil marks. This class focuses on using color relationships to create form\, depth\, and shading\, helping students move beyond drawing-based approaches that center primarily on line work rather than color as the basis for creating form. \n \nWhile we'll be using acrylic paint in class\, the skills you'll learn apply to many painting mediums\, such as oil\, gouache\, and watercolor. We may offer future classes that focus on techniques specific to those mediums. We'll start with simple objects and basic shapes\, learning how to create three-dimensional forms using color and brushwork. As we gain confidence\, we'll move on to more complex subjects and techniques. \n \nThe final classes will be tailored to the interests and goals of the students\, giving everyone the opportunity to practice these concepts on subjects they are personally interested in painting. Whether you're completely new to painting or looking to strengthen your fundamentals\, this class will help you better understand how artists use color to create convincing\, dimensional images. LOCATION:Classroom\, Knox Makers - 116 Childress St SW\, Knoxville\, TN URL:https://events.knoxmakers.org/event/painting-for-beginners-how-to-create-form-with-color END:VEVENT BEGIN:VEVENT UID:event-7843-session-0@haxdb DTSTAMP:20260614T163024Z DTSTART:20260801T170000Z DTEND:20260801T200000Z SUMMARY:Quilty Pleasures DESCRIPTION:Join us for an afternoon devoted to quilting! Bring your current project—whether you’re chain piecing\, working on HSTs\, squaring up blocks\, or diving into English or foundation paper piecing. Maybe you’re hand quilting or finishing up a binding—whatever you’re working on\, bring it along! \n \nWe’re all about learning\, sharing\, and enjoying some creative time together. It doesn't matter if you're just starting your quilting journey or have been enjoying the craft for decades\, all are welcome for a casual afternoon of fun\, shared stories and stitches. \n \n
\n
\nBring a friend if you want. RSVP is not required\, just show up when you can and stay however long you can. \n \nDirections-  Knox Makers parking and entrance is located around the back of the SPARK building in the fenced in area. Use Brady Street in map apps \n \nKnox Makers is a place for the Knoxville area’s engineers\, artists\, hobbyists\, innovators\, educators and entrepreneurs to work and play. We are a technology and art collective dedicated to the promotion of creativity enabled and informed by science. Our lectures\, workshops\, and outreach programs inspire and educate both members and the general public. Our workshop provides members with both the space for large projects and the tools to complete them. We are a non-profit educational organization supported by member dues and staffed by volunteers. LOCATION:Classroom\, Knox Makers - 116 Childress St SW\, Knoxville\, TN URL:https://events.knoxmakers.org/event/quilty-pleasures-7 END:VEVENT BEGIN:VEVENT UID:event-7986-session-3@haxdb DTSTAMP:20260614T163024Z DTSTART:20260801T203000Z DTEND:20260801T233000Z SUMMARY:Painting for Beginners: How to Create Form with Color - Session Four DESCRIPTION:Learn to paint by seeing the world as shapes\, color\, light\, and shadow rather than outlines and pencil marks. This class focuses on using color relationships to create form\, depth\, and shading\, helping students move beyond drawing-based approaches that center primarily on line work rather than color as the basis for creating form. \n \nWhile we'll be using acrylic paint in class\, the skills you'll learn apply to many painting mediums\, such as oil\, gouache\, and watercolor. We may offer future classes that focus on techniques specific to those mediums. We'll start with simple objects and basic shapes\, learning how to create three-dimensional forms using color and brushwork. As we gain confidence\, we'll move on to more complex subjects and techniques. \n \nThe final classes will be tailored to the interests and goals of the students\, giving everyone the opportunity to practice these concepts on subjects they are personally interested in painting. Whether you're completely new to painting or looking to strengthen your fundamentals\, this class will help you better understand how artists use color to create convincing\, dimensional images. LOCATION:Classroom\, Knox Makers - 116 Childress St SW\, Knoxville\, TN URL:https://events.knoxmakers.org/event/painting-for-beginners-how-to-create-form-with-color END:VEVENT BEGIN:VEVENT UID:event-7951-session-0@haxdb DTSTAMP:20260614T163024Z DTSTART:20260807T140000Z DTEND:20260807T210000Z SUMMARY:FreeCAD North American Meetup 2026 DESCRIPTION:The 2026 FreeCAD North American meetup is a gathering of FreeCAD professionals\, enthusiasts\, users\, and developers. In 2026 our annual gathering is being hosted by the [Knox Makers™](https://knoxmakers.org/) in Knoxville\, TN\, USA. The gathering is relatively informal: there will be ad hoc presentations\, discussions\, tutorials\, and other activities\, providing fertile ground for FreeCAD users and developers to work together to make FreeCAD better by sharing their experiences with each other. \n \nPlanning to swing by? Thinking about showing off a project\, giving a demo\, or sharing something you’ve been working on? Go ahead and register so we know you’re coming and can make room for everyone to jump in: [Register Here](Planning to swing by? Thinking about showing off a project\, giving a demo\, or sharing something you’ve been working on? Go ahead and register so we know you’re coming and can make room for everyone to jump in: [Register Here](https://events.freecad.org/conferences/freecad-north-america-2026/register/new) LOCATION:Classroom\, Knox Makers - 116 Childress St SW\, Knoxville\, TN URL:https://events.knoxmakers.org/event/freecad-north-american-meetup-2026 END:VEVENT BEGIN:VEVENT UID:event-7951-session-1@haxdb DTSTAMP:20260614T163024Z DTSTART:20260808T140000Z DTEND:20260808T210000Z SUMMARY:FreeCAD North American Meetup 2026 DESCRIPTION:The 2026 FreeCAD North American meetup is a gathering of FreeCAD professionals\, enthusiasts\, users\, and developers. In 2026 our annual gathering is being hosted by the [Knox Makers™](https://knoxmakers.org/) in Knoxville\, TN\, USA. The gathering is relatively informal: there will be ad hoc presentations\, discussions\, tutorials\, and other activities\, providing fertile ground for FreeCAD users and developers to work together to make FreeCAD better by sharing their experiences with each other. \n \nPlanning to swing by? Thinking about showing off a project\, giving a demo\, or sharing something you’ve been working on? Go ahead and register so we know you’re coming and can make room for everyone to jump in: [Register Here](Planning to swing by? Thinking about showing off a project\, giving a demo\, or sharing something you’ve been working on? Go ahead and register so we know you’re coming and can make room for everyone to jump in: [Register Here](https://events.freecad.org/conferences/freecad-north-america-2026/register/new) LOCATION:Classroom\, Knox Makers - 116 Childress St SW\, Knoxville\, TN URL:https://events.knoxmakers.org/event/freecad-north-american-meetup-2026 END:VEVENT BEGIN:VEVENT UID:event-7951-session-2@haxdb DTSTAMP:20260614T163024Z DTSTART:20260809T140000Z DTEND:20260809T180000Z SUMMARY:FreeCAD North American Meetup 2026 DESCRIPTION:The 2026 FreeCAD North American meetup is a gathering of FreeCAD professionals\, enthusiasts\, users\, and developers. In 2026 our annual gathering is being hosted by the [Knox Makers™](https://knoxmakers.org/) in Knoxville\, TN\, USA. The gathering is relatively informal: there will be ad hoc presentations\, discussions\, tutorials\, and other activities\, providing fertile ground for FreeCAD users and developers to work together to make FreeCAD better by sharing their experiences with each other. \n \nPlanning to swing by? Thinking about showing off a project\, giving a demo\, or sharing something you’ve been working on? Go ahead and register so we know you’re coming and can make room for everyone to jump in: [Register Here](Planning to swing by? Thinking about showing off a project\, giving a demo\, or sharing something you’ve been working on? Go ahead and register so we know you’re coming and can make room for everyone to jump in: [Register Here](https://events.freecad.org/conferences/freecad-north-america-2026/register/new) LOCATION:Classroom\, Knox Makers - 116 Childress St SW\, Knoxville\, TN URL:https://events.knoxmakers.org/event/freecad-north-american-meetup-2026 END:VEVENT BEGIN:VEVENT UID:event-7767-session-0@haxdb DTSTAMP:20260614T163024Z DTSTART:20260815T170000Z DTEND:20260815T200000Z SUMMARY:Stitch n Bitch DESCRIPTION:If you are fiber-curious\, come see what others are working on. We have members who sew clothing and costumes\, knit\, crochet\, weave\, quilt\, embroider\, and many other bitch-and-stitch arts.\n\nOur monthly meeting is meant to be a time to relax and indulge in any or all fiber arts hobbies. Whether you’re an expert or a novice come hang out for all or any part of the fiber fun.\n\nBring a friend if you want. RSVP is not required\, just show up when you can and stay however long you can.\n\nDirections-  Knox Makers parking and entrance is located around the back of the SPARK building in the fenced in area.\n\nKnox Makers is a place for the Knoxville area’s engineers\, artists\, hobbyists\, innovators\, educators and entrepreneurs to work and play. We are a technology and art collective dedicated to the promotion of creativity enabled and informed by science. Our lectures\, workshops\, and outreach programs inspire and educate both members and the general public. Our workshop provides members with both the space for large projects and the tools to complete them. We are a non-profit educational organization supported by member dues and staffed by volunteers. LOCATION:Fiber Arts Zone\, Knox Makers - 116 Childress St SW\, Knoxville\, TN URL:https://events.knoxmakers.org/event/stitch-n-bitch-43 END:VEVENT BEGIN:VEVENT UID:event-7844-session-0@haxdb DTSTAMP:20260614T163024Z DTSTART:20260905T170000Z DTEND:20260905T200000Z SUMMARY:Quilty Pleasures DESCRIPTION:Join us for an afternoon devoted to quilting! Bring your current project—whether you’re chain piecing\, working on HSTs\, squaring up blocks\, or diving into English or foundation paper piecing. Maybe you’re hand quilting or finishing up a binding—whatever you’re working on\, bring it along! \n \nWe’re all about learning\, sharing\, and enjoying some creative time together. It doesn't matter if you're just starting your quilting journey or have been enjoying the craft for decades\, all are welcome for a casual afternoon of fun\, shared stories and stitches. \n \n
\n
\nBring a friend if you want. RSVP is not required\, just show up when you can and stay however long you can. \n \nDirections-  Knox Makers parking and entrance is located around the back of the SPARK building in the fenced in area. Use Brady Street in map apps \n \nKnox Makers is a place for the Knoxville area’s engineers\, artists\, hobbyists\, innovators\, educators and entrepreneurs to work and play. We are a technology and art collective dedicated to the promotion of creativity enabled and informed by science. Our lectures\, workshops\, and outreach programs inspire and educate both members and the general public. Our workshop provides members with both the space for large projects and the tools to complete them. We are a non-profit educational organization supported by member dues and staffed by volunteers. LOCATION:Classroom\, Knox Makers - 116 Childress St SW\, Knoxville\, TN URL:https://events.knoxmakers.org/event/quilty-pleasures-8 END:VEVENT BEGIN:VEVENT UID:event-7768-session-0@haxdb DTSTAMP:20260614T163024Z DTSTART:20260919T170000Z DTEND:20260919T200000Z SUMMARY:Stitch n Bitch DESCRIPTION:If you are fiber-curious\, come see what others are working on. We have members who sew clothing and costumes\, knit\, crochet\, weave\, quilt\, embroider\, and many other bitch-and-stitch arts.\n\nOur monthly meeting is meant to be a time to relax and indulge in any or all fiber arts hobbies. Whether you’re an expert or a novice come hang out for all or any part of the fiber fun.\n\nBring a friend if you want. RSVP is not required\, just show up when you can and stay however long you can.\n\nDirections-  Knox Makers parking and entrance is located around the back of the SPARK building in the fenced in area.\n\nKnox Makers is a place for the Knoxville area’s engineers\, artists\, hobbyists\, innovators\, educators and entrepreneurs to work and play. We are a technology and art collective dedicated to the promotion of creativity enabled and informed by science. Our lectures\, workshops\, and outreach programs inspire and educate both members and the general public. Our workshop provides members with both the space for large projects and the tools to complete them. We are a non-profit educational organization supported by member dues and staffed by volunteers. LOCATION:Fiber Arts Zone\, Knox Makers - 116 Childress St SW\, Knoxville\, TN URL:https://events.knoxmakers.org/event/stitch-n-bitch-44 END:VEVENT BEGIN:VEVENT UID:event-7845-session-0@haxdb DTSTAMP:20260614T163024Z DTSTART:20261003T170000Z DTEND:20261003T200000Z SUMMARY:Quilty Pleasures DESCRIPTION:Join us for an afternoon devoted to quilting! Bring your current project—whether you’re chain piecing\, working on HSTs\, squaring up blocks\, or diving into English or foundation paper piecing. Maybe you’re hand quilting or finishing up a binding—whatever you’re working on\, bring it along! \n \nWe’re all about learning\, sharing\, and enjoying some creative time together. It doesn't matter if you're just starting your quilting journey or have been enjoying the craft for decades\, all are welcome for a casual afternoon of fun\, shared stories and stitches. \n \n  \n \nBring a friend if you want. RSVP is not required\, just show up when you can and stay however long you can. \n \nDirections-  Knox Makers parking and entrance is located around the back of the SPARK building in the fenced in area. Use Brady Street in map apps \n \nKnox Makers is a place for the Knoxville area’s engineers\, artists\, hobbyists\, innovators\, educators and entrepreneurs to work and play. We are a technology and art collective dedicated to the promotion of creativity enabled and informed by science. Our lectures\, workshops\, and outreach programs inspire and educate both members and the general public. Our workshop provides members with both the space for large projects and the tools to complete them. We are a non-profit educational organization supported by member dues and staffed by volunteers. LOCATION:Classroom\, Knox Makers - 116 Childress St SW\, Knoxville\, TN URL:https://events.knoxmakers.org/event/quilty-pleasures-9 END:VEVENT BEGIN:VEVENT UID:event-7769-session-0@haxdb DTSTAMP:20260614T163024Z DTSTART:20261017T170000Z DTEND:20261017T200000Z SUMMARY:Stitch n Bitch DESCRIPTION:If you are fiber-curious\, come see what others are working on. We have members who sew clothing and costumes\, knit\, crochet\, weave\, quilt\, embroider\, and many other bitch-and-stitch arts.\n\nOur monthly meeting is meant to be a time to relax and indulge in any or all fiber arts hobbies. Whether you’re an expert or a novice come hang out for all or any part of the fiber fun.\n\nBring a friend if you want. RSVP is not required\, just show up when you can and stay however long you can.\n\nDirections-  Knox Makers parking and entrance is located around the back of the SPARK building in the fenced in area.\n\nKnox Makers is a place for the Knoxville area’s engineers\, artists\, hobbyists\, innovators\, educators and entrepreneurs to work and play. We are a technology and art collective dedicated to the promotion of creativity enabled and informed by science. Our lectures\, workshops\, and outreach programs inspire and educate both members and the general public. Our workshop provides members with both the space for large projects and the tools to complete them. We are a non-profit educational organization supported by member dues and staffed by volunteers. LOCATION:Fiber Arts Zone\, Knox Makers - 116 Childress St SW\, Knoxville\, TN URL:https://events.knoxmakers.org/event/stitch-n-bitch-45 END:VEVENT BEGIN:VEVENT UID:event-7846-session-0@haxdb DTSTAMP:20260614T163024Z DTSTART:20261107T180000Z DTEND:20261107T210000Z SUMMARY:Quilty Pleasures DESCRIPTION:Join us for an afternoon devoted to quilting! Bring your current project—whether you’re chain piecing\, working on HSTs\, squaring up blocks\, or diving into English or foundation paper piecing. Maybe you’re hand quilting or finishing up a binding—whatever you’re working on\, bring it along! \n \nWe’re all about learning\, sharing\, and enjoying some creative time together. It doesn't matter if you're just starting your quilting journey or have been enjoying the craft for decades\, all are welcome for a casual afternoon of fun\, shared stories and stitches. \n \n  \n \nBring a friend if you want. RSVP is not required\, just show up when you can and stay however long you can. \n \nDirections-  Knox Makers parking and entrance is located around the back of the SPARK building in the fenced in area. Use Brady Street in map apps \n \nKnox Makers is a place for the Knoxville area’s engineers\, artists\, hobbyists\, innovators\, educators and entrepreneurs to work and play. We are a technology and art collective dedicated to the promotion of creativity enabled and informed by science. Our lectures\, workshops\, and outreach programs inspire and educate both members and the general public. Our workshop provides members with both the space for large projects and the tools to complete them. We are a non-profit educational organization supported by member dues and staffed by volunteers. LOCATION:Classroom\, Knox Makers - 116 Childress St SW\, Knoxville\, TN URL:https://events.knoxmakers.org/event/quilty-pleasures-10 END:VEVENT BEGIN:VEVENT UID:event-7770-session-0@haxdb DTSTAMP:20260614T163024Z DTSTART:20261121T180000Z DTEND:20261121T210000Z SUMMARY:Stitch n Bitch DESCRIPTION:If you are fiber-curious\, come see what others are working on. We have members who sew clothing and costumes\, knit\, crochet\, weave\, quilt\, embroider\, and many other bitch-and-stitch arts.\n\nOur monthly meeting is meant to be a time to relax and indulge in any or all fiber arts hobbies. Whether you’re an expert or a novice come hang out for all or any part of the fiber fun.\n\nBring a friend if you want. RSVP is not required\, just show up when you can and stay however long you can.\n\nDirections-  Knox Makers parking and entrance is located around the back of the SPARK building in the fenced in area.\n\nKnox Makers is a place for the Knoxville area’s engineers\, artists\, hobbyists\, innovators\, educators and entrepreneurs to work and play. We are a technology and art collective dedicated to the promotion of creativity enabled and informed by science. Our lectures\, workshops\, and outreach programs inspire and educate both members and the general public. Our workshop provides members with both the space for large projects and the tools to complete them. We are a non-profit educational organization supported by member dues and staffed by volunteers. LOCATION:Fiber Arts Zone\, Knox Makers - 116 Childress St SW\, Knoxville\, TN URL:https://events.knoxmakers.org/event/stitch-n-bitch-46 END:VEVENT BEGIN:VEVENT UID:event-7847-session-0@haxdb DTSTAMP:20260614T163024Z DTSTART:20261205T180000Z DTEND:20261205T210000Z SUMMARY:Quilty Pleasures DESCRIPTION:Join us for an afternoon devoted to quilting! Bring your current project—whether you’re chain piecing\, working on HSTs\, squaring up blocks\, or diving into English or foundation paper piecing. Maybe you’re hand quilting or finishing up a binding—whatever you’re working on\, bring it along! \n \nWe’re all about learning\, sharing\, and enjoying some creative time together. It doesn't matter if you're just starting your quilting journey or have been enjoying the craft for decades\, all are welcome for a casual afternoon of fun\, shared stories and stitches. \n \n
\n
\nBring a friend if you want. RSVP is not required\, just show up when you can and stay however long you can. \n \nDirections-  Knox Makers parking and entrance is located around the back of the SPARK building in the fenced in area. Use Brady Street in map apps \n \nKnox Makers is a place for the Knoxville area’s engineers\, artists\, hobbyists\, innovators\, educators and entrepreneurs to work and play. We are a technology and art collective dedicated to the promotion of creativity enabled and informed by science. Our lectures\, workshops\, and outreach programs inspire and educate both members and the general public. Our workshop provides members with both the space for large projects and the tools to complete them. We are a non-profit educational organization supported by member dues and staffed by volunteers. LOCATION:Classroom\, Knox Makers - 116 Childress St SW\, Knoxville\, TN URL:https://events.knoxmakers.org/event/quilty-pleasures-11 END:VEVENT END:VCALENDAR